Go to Our Web Site 		 
This is our product index page. Please use the keyword searching to narrow down the result. Or try our Advanced Search function.
  
 
<%-- ************************************************************ HTML Content Started Here ************************************************************ --%>
Category  : Spectrum Analyzers

Mfg. Name Mfg. Part# Product Add To Cart
 
3M 3M Dynatel 965 Subscriber Loop Analyzer Home
The Dynatel 965 subscriber loop analyzer performs all the tests needed to analyze and troubleshoot the subscriber loop, as well as cable plant in a single, portable unit. In addition, the 965 uses combinations of its test measurements in automatic functions called DC Line Test and AC Line Test, which interpret results and lead the operator toward possible solutions to complex cable problems. Specifications for 965 Subscriber Loop Analyzer Measures opens 0-100k feet, Counts loads up 0-5, voltage 0-250 VAC, 0-350 VDC, current 0-110 mA DC, Resistance 0-100 Mega o hms ohms, Noise metallic 10-50 dBrnC, Noise to ground 40-100 dBrnC, Frequency counter 20-20000 Hz, Ground resistance 0-500 ohms, Loop and CO resistance 0-5k ohms, Resistance fault locate 0-30 Megohms, Temperature sensor 0°-140°F, Noise immunity 7 Vac , Precision tones 404, 1004, 2804 Hz Tracing tone 577.5 Hz, Harmonic distortion <45 dB (up to 10th harmonic), Variable source 50 Hz to 10 kHz, operates on 5 C cell alkaline or rechargeable NiCd batteries. Typical battery life No backlight 40 hrs NiCd -120 hrs alkaline, With backlight 12 hrs NiCd- 35 hrs alkaline, Size H x W x D 7.0 x 10.5 x 7.5 , 5 ft cord, Net weight lbs.7.5, Operating temperature 0° to 140°F , Relative humidity 0-100% condensing, Operating altitude 0-15,000 ft
 
Advantest R3361A Advantest R3361A Spectrum Analyzer, 9Khz to 2.6 GHz Home
The R3361 Spectrum Analyzers are compact and lightweight which use a synthesized technique to cover wide frequency bands. It offers high performance functions such as central frequency with a 1 Hz resolution, start/stop frequency setting and an internal frequency counter with a 1 Hz resolution. Below are the features of the R3361 Analyzer. Features:
*Wide Frequency Range of 9Khz to 2.6 GHz
*Total Level Accuracy of 1 dB (typical value)
*CRT Display 120 dB
*Memory Card, GPIB Port Provided Standard
*Internal TG
 
Advantest R4131C Advantest R4131C Spectrum Analyzer Home
The Advantest R4131C spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Advantest R4131C. The CRT displays received signal strength (y-axis) against frequency ( x-axis).

Some applications for Advantest R4131C Spectrum Analyzers include Site Monitoring: Verify that the frequency and signal strength of your transmitter is accurate. Interference: Before a system is installed you use a Advantest R4131C spectrum analyzer to verify that the frequencies (you plan to use) are not occupied or if the presence of a very strong signal will interfere with your new setup. Interference can be created by a number of different situations. Other tests that utilize the Advantest R4131C spectrum analyzer features include antenna isolation, co-channel interference, adjacent channel power, occupied bandwidth, intermodulation, microwave or satellite antenna alignment, and characterization of components.

 
Advantest TR4171 Advantest TR4171 Spectrum Analyzer, 10Hz to 120MHz Home
The Advantest TR4171 is one of our used Spectrum Analyzers.This Analyzer is a wide band, very sensitive receiver. It works on the principle of "super heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities.
The received frequency spectrum is slowly swept through a range of pre selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of this unit.
The CRT displays received signal strength (y-axis) against frequency ( x-axis).

Specifications:
Dynamic Range: -999dBm
Frequency range: 10Hz to 120MHz

 
Agilent E4404B Agilent E4404B 9KHz-6.7 GHz w/opts - ESA-E Series Spectrum Analyzer Home
The Agilent HP E4404B ESA is one of our used mid -performance spectrum analyzers. The ESA family of spectrum analyzers have proven & guaranteed performance with the flexibility to select the right level of functionality for your test needs.
1D6 - Time Gated Spectrum Analysis
1DS - Built-in preamplifier
219 - Noise Figure Measurement personality
226 - Phase Noise Measurement personality, requires option 1DR for measurements less than 10 kHz
231 - ESA to 89601A Vector Signal Analysis software link utility
COM
 
Anritsu MS9001A1 Anritsu MS9001A1 Optical Spectrum Analyzer Home
Anritsu MS9001a1
 
HP 853A HP 853A Spectrum Analyzer Display Unit w/ HP 8558B Spectrum Analyzer Module w/ Opt. 002 Home
The 853A is our used digital display with the HP 8558B spectrum analyzer plug-in. Signals are displayed on either of two independently stored digital traces. Display processing capabilities include maximum hold, digital averaging, and trace normalization for extended measurement capability. A built-in microprocessor manages the display operation and provides access(via the front panel) to built-in routines for display calibration.
  • Traces: dual trace, digitally stored display with resolution of 481 horizontal by 801 vertical points per trace.
  • Signal Processing: maximum hold, digital averaging, and trace normalization.
  • Internal service routines: front-panel buttons access test routines for maintenance of digital hardware.


Option 002: 75 input, dBmV calibration

 
HP 85662A HP 85662A Spectrum Analyzer Display for 8566B Option: 650 Home
 
HP 8568D Hp 8568B Spectrum Analyzer 100Hz-1.5 GHz w/Analyzer Display Unit w/Options 85680B,001 Home
This HP 8568B is one of our used Spectrum Analyzers. It is a 100Hz-1.5 GHz unit w/analyzer display (HP 85662A) w/options 85680B, 001
 
HP 8594A HP 8594A Sprectrum Analyzer with opt. 004/021/101/105 Home
This used HP8594 is loaded with options 004/021/101/105. The HP8594A has a frequency range of 9KHZ to 2.9 GHZ and an amplitude range of -112 to +30dBm. This instrument has an optional 2.9 GHz built in tracking generator. In addition, each comes standard with a memory card reader that enables you to load HP¿s custom measurement personalities, your own programs or measurement data into the spectrum analyzer using their 32-Kbyte memory cards.
 
HP 3580A HP Agilent 3580A Spectrum Analyzer Option: 002 Home
The 3580A Spectrum Analyzer is a low frequency, high performance analyzer. Its 1Hz bandwidth allows the user to examine noise and extraneous signal content close in to a signal of interest. The 3580A features an adaptive sweep which allows the user to set a threshold above which only the spectra of interest are observed.

 
HP 70310A HP Agilent 70310A Precision Frequency Reference Home
The Agilent 70310A precision frequency reference, is a 1 slot wide plug in module for the Agilent 70001A mainframe, it provides precision reference signals for use with Agilent 70000 systems and other instruments. System frequency accuracy is enhanced because the 10 MHz and 100 MHz reference signals provided by the Agilent 70310A are phase-locked to an internal ovenized oscillator, resulting in superb stability over both time and temperature. With a highly accurate and stable reference, you can find signals more quickly by tuning to very narrow spans.
  • Precision 10 MHz and 100 MHz reference signals for use by Agilent 70000 systems and other instruments
  • Improves reference aging rate, frequency accuracy, and measurement speed
 
HP 70310A HP Agilent 70310A Precision Frequency Reference w/ opt 002 Home
The Agilent 70310A precision frequency reference, is a 1 slot wide plug in module for the Agilent 70001A mainframe, it provides precision reference signals for use with Agilent 70000 systems and other instruments. System frequency accuracy is enhanced because the 10 MHz and 100 MHz reference signals provided by the Agilent 70310A are phase-locked to an internal ovenized oscillator, resulting in superb stability over both time and temperature. With a highly accurate and stable reference, you can find signals more quickly by tuning to very narrow spans.
  • Precision 10 MHz and 100 MHz reference signals for use by Agilent 70000 systems and other instruments
  • Improves reference aging rate, frequency accuracy, and measurement speed
 
Agilent 70621A HP Agilent 70621A Preamplifier: 100 kHz - 2.9 GHz Home
The 70621A will boost the sensitivity of any Agilent 70000 series spectrum analyzer up to 2.9 GHz by 15 to 25 dB. System noise figures can be better than 8 dB at 2.9 GHz. Spurious testing can be slimmed from days to hours from the wider bandwidth that is useful due to the better sensitivity. Low-level signals from antennas will become visible as the noise floor is decreased. Broadband signal detection such as pulsed RF or electromagnetic interference is easier with a lower noise figure. Using the preamplifier is simple. Just install the preamplifier into the mainframe and hook up the cable. Whether in bypass mode or preamplifier mode, the system automatically calibrates the display of the analyzer.
  • 100 kHz to 2.9 GHz
  • Achieve -156 dBm sensitivity at 2.9 GHz
  • Calibrated data on screen at all times
  • Built-in bypass operation
 
HP 70900A HP Agilent 70900A Local Oscillator Module Home
The 70900A Local Oscillator Module provides a swept LO signal of 3.0 to 6.6 GHz, processes video signals, and acts as master controller for the spectrum analyzer.
 
Agilent 70900B HP Agilent 70900B LO Section Home
HP 70900B local oscillator source, compatibility, and what is needed to prepare an 70000 Series modular spectrum analyzer system for use. General information is provided, such as system rack-mounting, line-voltage selector location, electrostatic discharge precautions, packaging requirements. Also included is information about module addressing and installation, addressing and cable connection examples for various configurations, system specifications and characteristics, module input and output characteristics, along with tests required to verify system operation. Toward the end, a list of error messages that are displayed when the system encounters an error, the causes of an error message, and a solution to the problem is included where practical.

 
Agilent 70902A HP Agilent 70902A IF Section Home
The 70902A IF Section adds signal processing elements for spectrum analyzers, lightwave signal analyzers and other systems. It has 10% incremental bandwidth steps and calibrated logging amplifiers.
 
Agilent 70903A HP Agilent 70903A IF Section Home
The HP 70903A is a 1/8 width module that processes 21.4Mhz IF signal received from an RF or external mixer interface module. A detected video signal is produced and routed to the video processor in the LO. Contains resolution bandwidth filters, log amplifiers, detection circuitry, and video filters. Can be used in a single system to provide Res BWs of 100kHz to 3MHz.
 
Agilent 70904A HP Agilent 70904A RF Section Range Home
The 70904A RF Section is a 1/8 width module that serves as a front end for RF and microwave spectrum analyzer systems. This module contains an input attenuator. Converts the incoming RF signal to a 21.4 MHz IF.
  • 100Hz - 2.9GHz
 
Agilent 70905A HP Agilent 70905A Spectrum Analyzer RF Section Home
Our used HP Agilent 70905A Spectrum Analyzer RF Section provides broadband input conversion for analyzers.

Features: *broadband low noise mixers for a high dynamic range of 70 dB.
* A 10 dB step attenuator for use without a preselector.
* *A frequency range of 50kHz to 22GHz.
*Occupies 1 slot of the 70000 Modular Measurement System (MMS). Other Info:
 
HP 853A HP Agilent 853A Spectrum Analyzer Mainframe Home
The 853A is a digital display for use with the HP 8557A, 8558B and 8559A spectrum analyzer plug-ins. Signals are displayed on either of two independently stored digital traces. Display processing capabilities include maximum hold, digital averaging, and trace normalization for extended measurement capability. A built-in microprocessor manages the display operation and provides access(via the front panel) to built-in routines for display calibration.
  • Traces: dual trace, digitally stored display with resolution of 481 horizontal by 801 vertical points per trace.
  • Signal Processing: maximum hold, digital averaging, and trace normalization.
  • Internal service routines: front-panel buttons access test routines for maintenance of digital hardware.
 
Agilent 85620A HP Agilent 85620A Mass Memory Module Revision B Home
Agilent/HP Mass Memory Module.
 
Agilent 85640A HP Agilent 85640A RF Tracking Generator Home
HP 85640A RF Tracking Generator 300 kHz - 2.9 GHz.

 
Agilent 8596E HP Agilent 8596E Portable Spectrum Analyzer, 9 kHz to 12.8 GHz w/ Opt. 004,119,151,160,041 Home
HP Agilent 8596E Portable Spectrum Analyzer, 9 kHz to 12.8 GHz

Opt. 004,119,151,160,041 130
 
HP 8981B HP Agilent 8981B Vector Modulation Analyzer Home
The HP 8981B Vector Modulation Analyzer is a two channel X-Y sampling oscilloscope designed to analyze the in-phase(I) and quadrature phase(Q) components of modern digital microwave radio signals such as QPSK, 16QAM, and 256QAM. The HP 8981B has a 50MHz to 200MHz demodulator.
  • Analyzes coherent phase and amplitude modulation
  • 350MHz I vs. Q Bandwidth
  • Markers for measuring phase, amplitude and time
  • Displays magnitude and phase at time marker or magnitude and phase versus time
  • 12-bit digitizing for HPIB measurements
  • 50MHz - 200MHz I/Q demodulator
  • less then 0.5° quadrature and less then 0.1dB amplitude imbalance
 
HP 70001A HP/Agilent 70001A System Mainframe Home
The Agilent 70001A system mainframe provides the structural environment for MMS plug-in modules as well as cooling, power, and digital communication interface buses (MSIB and GPIB). It has eight slots available for single or multiple-slot modules. It is compatible with standard EIA racks, and its integral bails and handles make benchtop use easier. The mainframe has good EMC performance and rugged structural design, making it suitable for sensitive measurements in tough industrial environments. The modular system interface bus (MSIB) provides high speed digital communication between MMS instruments, modules, and displays connected in the same system. The MSIB allows simultaneous communication between all modules on the bus. The Agilent interface bus (GPIB) is used to provide computer control and communication between MMS instruments and other GPIB instruments, including VXIbus products.
 
Rohde & Schwarz FSP3 R & S Spectrum Analyzer FSP3 *Calibrated* 9KHz -3 GHz w/Option FSP-B9 Home
*Unit calibrated on 2/20/2010*
Rhode Schwarz Spectrum Analyzer FSP3 Hz -3 GHz w/Option FSP-B9. It features:
* Frequency range 20Hz to 3GHz, 7 GHz, 13 GHz, 30 GHz and 40 GHz
* Resolution bandwidth 1 Hz to 10 MHz
* Displayed average noise level -155 dBm (1 Hz)
* Phase noise -113 dB (1 Hz) at 10 kHz
Option FSP-B9: Internal Tracking Generator 9kHz to 3 Ghz
 
Tektronix 2714 Tektronix 2714 Spectrum Analyzer Oscilloscope w/Opts 40,000,and 60,000 Home


The 2714 Cable TV Spectrum Analyzer provides the ultimate in ease and economy for cable TV and broadband LAN measurements. It¿s cable ready with a 75-ohm BNC input that can be quickly changed to a 75-ohm F-connector input. Measurement results can be output to a printer or plotter connected directly to the 2714¿s interface port. The PC-based software package that accompanies the 2714 runs automated cable TV measurements via an RS-232 or GPIB interface and provides a perpetual database for tracking performance. ¿ Frequency Range: 9kHz to 1.8GHz

 
Tektronix 2754P Tektronix 2754P Spectrum Analyzer: 10 kHz to 21 GHz Option: 01 Home
The 2754P spectrum analyzer has a frequency range of 10 kHz to 21 GHz with internal mixers, expandable to 220 GHz with external mixers (sold separately). It has a viewable dynamic range of 80 dB and a gain compression of -13 dBm. The unit has free run, line, video, single, and external triggering.
 



©1999-2002 [fill in company name] All Rights Reserved contact webmaster | powered by corezon
All logos and trademarks are properties of their respective companies. Product price, specification, warranty and availability subject to change without notice.