The HP 54100D unites a powerful 1 GHz bandwidth with a random repetitive sampling technique for viewing rarely occurring narrow waveforms. With 40 megasamples/second single shot digitizing rate and an effective digitizing rate of 100 gigasamples/second, these oscilloscopes yield 0.002% time base accuracy, 50 ps aperture jitter, and 10 ps resolution for confident measurements of critical timing parameters in high speed circuitry.

• 1GHz bandwidth
• Auto pulse parameter and time interval measurements
• Digital storage
• Pre-trigger viewing
• Logic triggering capability

• 500 MHz Analog Bandwidth on 2 channels.
• Up to 1 GSa/s Sample Rate.
• 1 ns Peak Detect.

• 100 MHz bandwidth
• Analog-like look and feel
• Automatic and cursor measurements of frequency, time and voltage
• Waveform storage
• Save/recall of 16 setups
• Autoscale

• Unfiltered BW GHz(typical): 2.5(>3.0)
• Number of filters: 2
• Filter Rates: 155 and 622 Mbit/s
• Fiber Input: 9/125 µm
• Wavelength: 1000-1600nm
• Sensitivity: -17 dBm

• Integrated/calibrated optical channel with sensitivity to below -17 dBm
• 750 to 860 nm wavelength range
• Automatic/switchable filters for compliance testing at both 1063 and 1250 Mb/s or 155/622 Mb/s
• 20/12.4 GHz bandwidth electrical channel
• 2.5/12.5 GHz trigger channel (set by mainframe)

• System clock:
• - Frequency range: 1 kHz to 667 MHz.
• External Start/Stop.
• Ext. Clock / Ext. Reference:
• - used as PLL reference or external bit rate for the system clock.
• Trigger output:
• - used to trigger other test equipment or an oscilloscope.
• Guided Deskew.