Go to Our Web Site 		 
This is our product index page. Please use the keyword searching to narrow down the result. Or try our Advanced Search function.
  
 
<%-- ************************************************************ HTML Content Started Here ************************************************************ --%>
Category  : Mainframes & Plug-ins

Mfg. Name Mfg. Part# Product Add To Cart
 
Fluke 99 Fluke 99 50 Mhz Scopemeter Home
  • Bandwidth: 50 MHz Dual Channel
  • Sample Rate: 25 Megasamples/second
  • Autoset: Automatically sets Voltage, Time & Trigger
  • Multimeter Display: 3 2/3 Digits (> 3000 Counts)
  • True RMS Volts: AC or AC+DC up to 600V (1700V Pk-Pk)
  • Resistance: 30 ohm to 30 Mohm
  • Diode Test: up to 2.8V
  • Continuity Beeper
  • Time/Division: 10 ns/div to 60 sec/div
  • Volts/Division: 1 mV/div to 100 V/div
  • Current Probe Scaling
  • Digital Delay or Pre-Trigger: By Number of Cycles, Events, Time or Zoom Mode
  • Special Multimeter Modes: Min Max Average Record with Time Stamp, Relative (zero),
  • dBm, dBV, dBW, Audio Watts, %Scale, Frequency, %Duty Cycle, Smoothing?, Change Alert?
  • Oscilloscope Cursors: Display 5 Simultaneously
  • Glitch Capture: >40 ns
  • Waveform Processing: Average, Min Max, Record, Variable Persistence
  • Waveform Memory: Store & Recall 20 Waveforms
  • Set-up Memory: Store & Recall 40 Front Panel Set-Ups
  • Waveform Mathematics: Add, Subtract, Multiply, Invert, Filter or Integrate Waveforms
  • Signal Generator Output: Sine wave or Square wave
  • Component Tester Output: voltage or current ramp

    		•
     
    Agilent 16531A HP Agilent 16531A Digitizing Oscilloscope Card: 100 MHz, 2 Channel, 400 MSa/s Home
    The 16531A digitizing oscilloscope card provides an Oscilloscope-on-a-Card capability to your Logic Analyzer when used with the 16530A time base card (sold seperately). Bandwidth of 100 MHz and sample rate of 400 MSa/s. Has 2 channels per card.
     
    Agilent 16532A HP Agilent 16532A Digitizing Oscilloscope Card: 250 MHz, 2 Channel, 1 GSa/s Home
    The 16532A digitizing oscilloscope card allows you to make a full-featured digitizing oscilloscope from your logic analyzer. It offers digitizing advantages such as autoscale, automatic measurements, powerful triggering, negative time viewing, voltage markers, and time matkers. Bandwidth of 250 MHz and sample rate of 1 GSa/s. Has 2 channels per card.
     
    Stanford Research SR280 Stanford Research SR280 NIM Mainframe and Display Home
    The SR280 is the Boxcar Averager System mainframe. The mainframe is NIM (Nuclear Instrumentation Module) compatible and has twelve slots. The three right-most slots are filled by the display module and nregulated power supplies, leaving nine slots for other NIM modules. The DC power supply regulators are mounted on a heat sink on the rear of the mainframe.

    The display module features three types of meters. The analog meter is for "peaking-up" an experimental signal. The digital voltmeter provides a numeric readout. The "Digital Hold" button may be used to hold the digital meter?s reading. A 20-segment bar graph display may be used to show rapidly changing data.
     
    Tektronix Tektronix 7854 Oscilloscope Home
     
    Tektronix 7A16A Tektronix 7A16A Plug-in Amplifier Module Home
    DC to 75MHz Bandwidth

    5mV/div to 5V/div Deflection Factors

    1 MegaOhm Input

    Bandwidth is selectable to full or limited to 20MHz for low frequency applications
     
    Tektronix 7A24 Tektronix 7A24 Plug-in Dual Trace Amplifier Module Home
    DC to 350MHz Bandwidth 5mV/div to 1V/div Deflection Factors

    50 Ohm Input
     
    Tektronix 7A26 Tektronix 7A26 Plug-in Dual Trace Amplifier Module Home
    Dual-Trace Plug-in Amplifier

    DC to 200MHz Bandwidth

    5 mV/div to 5V/div Deflection Factors

    1 MegaAmp Input

    Bandwidth May be set at Full of limited to 20MHz for low frequency applications
     
    Tektronix 7B10 Tektronix 7B10 Plug-in Time Base Module Home
    0.2ns/div to 0.5/div Time Base

    Triggering to 1GHz

    Variable Trigger Holdoff

    Peak-to-Peak Auto Triggering
     
    Tektronix 7B15 Tektronix 7B15 Plug-in Delaying Time Base Module Home
    0.2ns/div to 0.5/div Time Base

    Triggering to 1GHz

    Variable Trigger Holdoff

    Peak-to-Peak Auto Triggering

    Chage in Time Measurements with CRT Readout

    Delay Time Measurements with CRT Readout

    Vertical Trace Seperation between two delayed sweeps
     
    Tektronix 7B53A Tektronix 7B53A Plug-in Dual Time Base Module Home
    5ns/div to 5s/div Time Base

    Mixed Sweep

    Triggering to 100MHz

    Single-Sweep Operation
     
    Tektronix 7B80 Tektronix 7B80 Plug-in Time Base Module Home
    1ns/div to 5s/div Time Base

    Triggering to 400MHz

    Variable Trigger Holdoff

    Peak-to-Peak Auto Triggering
     
    Tektronix 7B85 Tektronix 7B85 Plug-in Delaying Time Base Module Home
    1ns/div to 5s/div Time Base

    Triggering to 400MHz

    Variable Trigger Holdoff

    Peak-to-Peak Auto Triggering

    Change in Time Measurements with CRT Readout

    Delay Time Measurements with CRT Readout

    Vertical Trace Seperation between two Delayed Sweeps
     
    Tektronix Tektronix 7B92A Home
     
    Tektronix 7S11 Tektronix 7S11 Plug-in Sampling Sweep Unit Module Home
    2mV/div to 200mV/div Deflection Factors

    Takes a single Plug-in Sampling Head
     
    Tektronix HFS9003 Tektronix HFS9003 Programmable Stimulus System Mainframe Home
    The Tektronix HFS9000 stimulus systems takes the features of a high-performance pulse generator and adds complete data generation capabilities as well. This eliminates the need for a switch matrix since there is data and timing on every pin. And the need for a separate power supply is gone, as the HFS9003 has the ability to produce the DC levels needed to drive logic lines directly. Finally, all these capabilities are present on every pin simultaneously, so you get extremely flexible formatting. Now you can set up a complete stimulus system in minutes, rather than hours or days, and test products more thoroughly throughout the development cycle. The HFS9003 is a 3-slot maingframe with 12-Channel capability.
     
    Tektronix SD30 SD-30 Tektronix SD-30 Sampling Head Home
    The SD-30 is a single channel, 50 GHz sampling head. Rise time: less than 7.0ps.
     
    Tektronix TDS3VM Tektronix TDS3VM Interface Module: RS-232 and VGA for TDS3000 Series Oscilloscopes Home
    The TDS3VM is an RS-232 and VGA interface module for use with the Tektronix TDS3000 series digital phosphor oscilloscopes.
     



    ©1999-2002 [fill in company name] All Rights Reserved contact webmaster | powered by corezon
    All logos and trademarks are properties of their respective companies. Product price, specification, warranty and availability subject to change without notice.