Go to Our Web Site 		 
This is our product index page. Please use the keyword searching to narrow down the result. Or try our Advanced Search function.
  
 
<%-- ************************************************************ HTML Content Started Here ************************************************************ --%>
Category  : Signal Generators

Mfg. Name Mfg. Part# Product Add To Cart
 
Anritsu MG3602A Anritsu MG3602A Synthesized Signal Generator: 100 kHz to 2.08 GHz Home
The MG3602A is a 100 kHz to 2.08 GHz synthesized signal generator.
 
Anritsu MG3632A Anritsu MG3632A Synthesized Signal Generator: 100 kHz to 2.08 GHz Home
The MG3632A is a 100 kHz to 2.08 GHz synthesized signal generator.
 
Anritsu MG3671B Anritsu MG3671B Digital Modulation Signal Generator: 2.75 GHz w/ Opt MG0301C, MG0302A, MG0312A Home
The MG3671B is a 300 kHz to 2750 MHz signal generator providing a stable and precise output as well as spectrum purity up to a maximum output of +13dBm, even with modulation. In addition to testing receiver sensitivity and excess input, it can be used for testing IF stage performance and for evaluating device quality. A CMOS-level mode is provided for I/Q signal input. Input frequency band covers the CDMA spread spectrum band, expanding the range of applications.
 
Applied Instruments 1685 Applied Instruments 1685 CATV 8 Carrier Signal Gen Home
Features:
* Eight individually or simultaneously activated RF carriers
* Spectral purity in excess of 60 dB allows accurate hum and noise evaluation tests without interference
* +50 dBmV full output

Applications
* CATV system alignment
* Carrier-to-noise measurement
* Carrier-to-hum measurement
* CSO Composite Second Order
* CTB Composite Triple Beat

Specifications:
* Frequency range 5-1000 MHz, (Eight frequencies selected at time of order)
* Maximum output level (all carriers) +50 dBmV
* Attenuator 0 to 70 in 10 dB steps
* Individual amplitude adjustment 0 to 13 dB
* Amplitude stability ±0.5 dB/setting
* Spectral purity (spurious & harmonic) >60 dBc
* Residual hum <0.01%
* Frequency accuracy >0.01% (10 MHz to 1000 MHz) ±1.0 kHz (5 MHz to 10 MHz)
* Output impedance 75
* Size (H x W x D) 1.75" x 19" x 12.5"
(4.5cm) x (48.3cm) x (31.8cm)
* Power 115/230 VAC, 60/50 Hz
 
Gigatronics 6000 Gigatronics Synth Signal Generator 6000 / 6-18 Home
Specifications:
  • Synthesized Source.
  • 6-18 GHz Range.
  • 1 MHz resolution.
  • GPIB port on rear panel.
 
HP 8165A HP / Agilent 8165A 1mHz - 50 MHz, Programmable Signal Source Home
The HP Agilent 8165A Programmable Signal Source is a versatile function generator with good accuracy and many trigger features. The 8165A features microprocessor control that assures rapid, accurate setup whether you're programming locally or via HP-IB.
The 8165A frequency stability is ensured with an internal crystal. The 8165A's four-digit frequency display provides a 1 microhertz resolution in the 1 to 9.999 millihertz range. In normal mode, the accuracy of the 8165A is 0.001% with a stability of +-1 x 10e-6.
 
HP 11759B HP Agilent 11759B RF Channel Simulator: 40 MHz to 2 GHz w/ Opt 002 Home
With the HP 11759B RF Channel Simulator it is easy to simulate the fast and slow fading, time dispersion, and Doppler shifts experienced in a mobile radio environment. Designed to test digital cellular radios under RF multipath conditions, the 11759B is also suitable for testing many other analog and digital wireless communications systems with RF bandwidths to 1.9MHz under RF multipath fading conditions.
  • Two channels of three paths each
  • Rayleigh, Rice or log-normal fading
  • Doppler to 85Hz
  • Delay intervals to 170µs
  • RF bandwidth >1.9MHz
  • PC controlled
 
Agilent 33120A HP Agilent 33120A Arbitrary Waveform Generator Opt. 001 Home
The HP 33120A is a high performance, full function 15MHz synthesized function generator. It features sine, triangle, square, ramp, and noise waveforms, a 12-bit 40MSa/s 16000 point deep arbitrary waveform generator, and both internal sweep and modulation capabilities. The 33120A is ideal for both bench and systems applications. Both GPIB and RS232 interfaces are standard. The performance of the 33120A was designed in, not left out. This means that you get clean, low-distortion sine waves, fast rise and fall time squarewaves, and linear triangle and ramp waveforms. Further, due to the latest direct digital synthesis techniques utilized in the 33120A, you can get down to 10µHz frequency resolution.
  • 15MHz sine and square wave outputs
  • Sine, triangle, ramp, noise, and more
  • 12-bit, 40MSa/s, 16,000 point deep arbitrary waveforms
  • Direct digital synthesis for excellent stability
  • Linear and log sweeps built-in
  • AM, FM, FSK, and burst modulation built-in
  • GPIB and RS232 interfaces both standard
 
Agilent 70311A HP Agilent 70311A Clock Source Home
HP Agilent 70311A Clock Source.

Features:

  • 3GHz Signal Source Clock Module.
  • 10MHz Ref In.
  • A specific set of clock sources are compatible with the Agilent 71501C.
  • Choice of clock source: depends on data rates and jitter modulation requirements.
 
Agilent 8180B HP Agilent 8180B Data Generator (Cosmetic Damage) - Calibrated Home
The 8180B is a high speed data generator for the stimulation of digital IC's and boards. Features 50 MB/s parallel data rate and 8 parallel channels. Unit has cosmetic damage on the top of the case and was calibrated on April 17, 2007.
 
Agilent 8656B HP Agilent 8656B 990 MHz Signal Generator Home
The HP Agilent 8656B is a 990 Mhz Signal Generator. With Power Cord.

 
Agilent 8657A HP Agilent 8657A 1 GHz Signal Generator with Option 001 Home
The 8657A offers excellent performance at an economical price. The low residual FM and excellent phase noise performance of these signal generators make them ideal for many in-channel and even out-of-channel receiver tests. The 8657A is a versatile signal generator offering a variety of features, such as simultaneous and mixed modulation combinations of AM and FM, as well as a carrier phase adjust capability that allows you to characterize phase-sensitive devices. In addition, the 8657A offers a wide output range, +13 dBm to ?143.5 dBm into 50 Ohm (+10 dBm to ?143.5 dBm for frequencies from 100 kHz to 1 MHz), with superior level accuracy specs: <±1.5 dB (>+7 dBm), <±1.0 dB (+7 to ?127 dBm), <±1.5 dB (
Includes option 001: high stability timebase
 
Agilent 8662A HP Agilent 8662A High-Performance Signal Generator: 10 kHz to 1.28 GHz Home
Spectral purity is the key contribution of the 8662A signal generator, making it ideal for many radar, satellite communication, and phase noise measurement applications. Typical absolute phase noise performance of this generator at a 1 kHz offset is as low as -135 dBc/Hz, depending on the band of operation. The frequency range of the 8662A is 10 kHz to 1280 MHz. It offers versatile AM/FM, using either internal 400 Hz and 1 kHz rates or externally applied modulating signals.
 
Agilent 8683B HP Agilent 8683B Microwave Signal Generator: 2.3 GHz to 6.5 GHz Home
The 8683B is a 2.3 GHz to 6.5 GHz signal generator. Features +10 dBm output, 5 MHz resolution using a 4-digit display, internal and external AM, FM and pulse modulation.
 
Agilent 8782B HP Agilent 8782B Vector Signal Generator: 1 MHz to 250 MHz Home
The 8782B is a 1 MHz to 250 MHz vector signal generator with 1 Hz resolution. Specifications:
  • Internal Reference Oscillator: Aging Rate: Less than 1.5 x 10e-9 per day after 10 day warm-up for internal reference. (Typically less than 1.5 x 10e-9 per day after 24 hour warm-up in normal operating environment) Temperature Effects: Typically less than 1 x 10e-7/°C Line Voltage Effects: Typically less than 1 x 10e-8/°C RF Output Level Specifications
  • Accuracy and Stability: Same as reference oscillator
  • Level Range: +7 to -100 dBm +10 dBm typical
  • Please contact sales for full manufacturer specifications
 
IFR 2025 IFR / Aeroflex / Marconi 2025 9 kHz - 2.51 GHz Signal Generator Calibrated Home
The IFR / Aeroflex / Marconi 2025 is a 9 kHz to 2.51 GHz Synthesized Signal Generator. The 2025 is a portable, lightweight generator offering a wide choise of modulation modes. The 2025 is suitable for use in laboratory, production, or maintenance environments.

  • 9 kHz to 2.51 GHz Frequency Range.
  • 1 Hz Frequency Resolution.
  • -140 to +13 dBm, 0.1 dB Resolution.
  • AM, FM, Phase, Pulse, FSK Modulation.
  • Log and Linear Sweep Modes.
  • GPIB and RS232 Standard.


    • Quality Control Information About This Instrument:
    As part of TechRecovery?s Inbound Quality Control Procedure, this instrument is guaranteed to be within all OEM specifications and has been calibrated by an accredited independent calibration lab to NIST traceable standards. Should you require a fresh calibration and or an extended warrantee, one can be purchased for an additional charge.
     
    Programmed Test Sources PTS300 Programmed Test Sources PTS300 Frequency Synthesizer Home
    The PTS300 is a 100 kHz to 300 MHz frequency synthesizer.
     
    Programmed Test Sources PTSD310 Programmed Test Sources PTSD310 Dual Channel Frequency Synthesizer Home
    The PTSD310 is a dual channel 100 kHz to 310 MHz frequency synthesizer.
     
    RDL Intermodulation RDL Intermodulation Distortion Simulator Home
    This RDL: Is a Intermodulation Distortion Simulator. Frequency range: 1450 MHz to 1560 MHz. This unit: retailed for over $1,000.00. Actual unit pictured
     
    Rohde & Schwarz SME03E Rohde & Schwarz SME03E Signal Generator 5 kHz to 2.2 GHz w/ Opt B11, B12, B05, B41, B42 Home
    R&S® SME03E: 5 kHz to 2.2 GHz Unit includes the following options: B11 DM Coder B12 DM Memory Extension 8 Mbit B05 FM/jM Modulator B41 Flex Protocol Option B42 POCSAG Protocol
     
    Rohde & Schwarz SMG Rohde & Schwarz SMG Signal Generator: w/Opt. B1 100 kHz to 1 GHz Home
    The SMG is a 100 kHz to 1 GHz signal generator.
     
    Rohde & Schwarz SMHU58 Rohde & Schwarz SMHU Signal Generator: 100 kHz to 4.3 GHz Home
    The SMHU is a 100 kHz to 4.3 GHz signal generator.

    Quality Control Information About This Instrument:
    As part of TechRecovery?s Inbound Quality Control Procedure, this instrument is guaranteed to be within all OEM specifications and has been calibrated by an accredited independent calibration lab to NIST traceable standards. Should you require a fresh calibration and/or an extended warrantee, one can be purchased for an additional charge.

     
    Rohde & Schwarz SMIQ03 Rohde & Schwarz SMIQ03 Signal Generator: 3.3 GHz OEM Calibrated Home
    The SMIQ03 (part number 1084.8004.03) is a 300 kHz to 3.3 GHz vector signal generator. This unit has the following options:
    • SM-B1 (OSZ-OCXO)
    • SM-B5 (1036.8489.02)
    • SMIQB10 (1085.5009.02)
    • SMIQB11 (1085.4502.02)
    • SMIQB14 (1085.4002.02)
    Unit was calibrated on December 11, 2006
     
    Rohde & Schwarz SMIQ03E Rohde & Schwarz SMIQ03E, Signal Generator, 300kHz - 3.3GHz, Opt. B10, B11 Home
    The SMIQ03 (part number 1106.1506.03) is a 300 kHz to 3.3 GHz vector signal generator. This unit has the following options:
    • SMIQB10
    • SMIQB11
     
    Rohde & Schwarz SMT03 Rohde & Schwarz SMT03 Signal Generator- CALIBRATED Home
    Rohde & Schwarz SMT03 Signal Generator.
     
    Rohde & Schwarz SMIQ02 Rohde and Schwarz SMIQ02 Vector Signal Generator: 300 kHz to 2.2 GHz B19 Home
    The SMIQ02 (part number 1084.8004.02) is a 300 kHz to 2.2 GHz vector signal generator. This unit has the following options:
    • SMIQB19


    Quality Control Information About This Instrument:
    As part of TechRecovery?s Inbound Quality Control Procedure, this instrument is guaranteed to be within all OEM specifications and has been calibrated by an accredited independent calibration lab to NIST traceable standards. Should you require a fresh calibration and/or an extended warrantee, one can be purchased for an additional charge.

     
    Rohde & Schwarz SMIQ02 Rohde and Schwarz SMIQ02 Vector Signal Generator: 300 kHz to 2.2 GHz B5 B10 B11 B14 Home
    The SMIQ02 (part number 1084.8004.02) is a 300 kHz to 2.2 GHz vector signal generator. This unit has the following options:
    • SM-B5 (1036.8489.02)
    • SMIQB10 (1085.5009.02)
    • SMIQB11 (1085.4502.02)
    • SMIQB14 (1085.4002.02)


    Quality Control Information About This Instrument:
    As part of TechRecovery?s Inbound Quality Control Procedure, this instrument is guaranteed to be within all OEM specifications and has been calibrated by an accredited independent calibration lab to NIST traceable standards. Should you require a fresh calibration and/or an extended warrantee, one can be purchased for an additional charge.

     
    Tektronix AFG310 Tektronix AFG310 Arbitrary Waveform Generator Home
    The AFG310 is a single channel 5-in-1 instrument: an excellent 16 MHz function generator with built-in arbitrary waveform, burst, sweep, and modulation capabilities. This unit supports standard waveforms including sine, square, triangle, ramp, pulse, DC and noise. Its sweep function includes Linear and Logarithmic (up or down) while operating in the Continuous, Triggered, and Burst modes.

    With a sample rate of 16 MS/s, 12-Bit vertical resolution and a non-volatile memory that holds four 16,384-point waveforms, the AFG310 is a powerful tool for simulating complex waveforms.

    Unit was calibrated on December 26, 2006
     



    ©1999-2002 [fill in company name] All Rights Reserved contact webmaster | powered by corezon
    All logos and trademarks are properties of their respective companies. Product price, specification, warranty and availability subject to change without notice.