Go to Our Web Site
		This is our product index page. Please use the keyword searching to narrow down the result. Or try our Advanced Search function.

<%-- ************************************************************ HTML Content Started Here ************************************************************ --%> Category  : Meters & Sensors Mfg. Name Mfg. Part# Product Add To Cart   Advantest Q32605 Advantest Q32605 Optical Receiver Plug-In Home Advantest Q32605 Optical Receiver Plug-In. Features: Minimum Wavelength: 1200 nm. Maximum Wavelength: 1600 nm. Minimum Power: 10 uW. Maximum Power: 0.01 Watts. Measurement Accuracy: 0.105925372517729 %. Connector type (main signal): FC/PC,SMA.   Advantest Q82215 Advantest Q82215 Power Sensor Home Advantest Q82215 Power Sensor.   Advantest Q82226 Advantest Q82226 Power Sensor Home Advantest Q82226 Power Sensor.   Advantest Q82232 Advantest Q82232 Power Sensor Home Advantest Q82232 Power Sensor.   Advantest TQ82014 Advantest TQ82014 Optical Power Sensor Home Advantest TQ82014 Optical Power Sensor.   ANDO AQ2743 Ando AQ2743 Sensor Home Our Ando AQ2743 is a used sensor with the following features: *750-1800nm *CW:-80〜+10dBm *CHOP:-90〜+7dBm   Anritsu ML9001A Anritsu ML9001A Optical Power Meter Home The ML9001A is a single-channel digital-display optical power meter. It insures accuracy and linearity over a wide wavelength range and greatly improves measurement reliability. It also has an improved basic performance. For example, measurement can be made over the wide level range from ¿100 to +20 dBm because internal reflection in the power sensors has been suppressed. The ML9001A also has many new functions which make it easier to use than other power meters. It can be used for all optical power measurements such as optical fiber loss measurement and optical device performance evaluation. Serial number 6100082408   Anritsu ML9002A Anritsu ML9002A Optical Handy Power Meter Home The ML9002 is a compact handy optical power meter with a measurement level as wide as other more expensive instruments. Each optical sensor can either be incorporated directly in the mainframe or connected using a connecting cord. The ML9002A can be used to check optical disks, optical printer and optical communications systems and can back-up on-site operations as a powerful multifunctional measuring instrument for maintenance.   Anritsu ML93A Anritsu ML93A Optical Power Meter Home Anritsu ML93A Optical Power Meter.   Anritsu ML93B Anritsu ML93B Optical Power Meter Home Anritsu ML93B Optical Power Meter.   Boonton 9200 Boonton 9200 RF Millivoltmeter Home This Boonton unit: Is a Boonton 9200 RF Voltmeter, with option 01B. Specifications:1) Input impedance: 50 ohms.2) Voltage range: 200uV-3V (300V with divider). 3) Frequency Range: 10Hz - 2.5GHz.4) True RMS response below 30mV (to 3V with 100:1 divider).5) 3? Digit Digital Display.6) 1% Basic Accuracy.7) 0.01 dB Resolution.8) Option 01B: GP-IB Interface. Actual unit pictured   EXFO IQ3200 IQ-3200-B58 Exfo IQ-3200-B58 Return Loss Meter Home EXFO IQ3200 Return Loss Meter. Model: IQ-3200-B58.   EXFO IQ3200 IQ-3200 Exfo IQ-3200-BEA Return Loss Meter Home EXFO IQ3200 Return Loss Meter. Model: IQ-3200-BEA.   EXFO IQ-3300-B58 EXFO IQ-3300-B58 Variable Reflector Home EXFO IQ3300 Variable Reflector. Model: IQ-3300-B58. Front Panel has hairline crack.   EXFO IQ-3400-89 EXFO IQ-3400-89PDL-OL Meter Home EXFO IQ3400 PDL-OL Meter. Model: IQ-3400-89. Front Panel has hairline crack.   Fluke OC3port Plus Fluke OC3port Plus Handheld ATM Tester Home The Fluke OC3port Plus portable hand-held tester provides an extensive set of OC3 and ATM testing capabilities that address a broad range of test requirements for OC3- and ATM-based transmission and communications systems. The OC3port Plus is specifically designed to allow you to test any type of OC3/ATM equipment for proper operation, configuration, compliance, and interoperability. The OC3port Plus combines SONET testing features with advanced ATM testing features, giving you the ability to quickly test and troubleshoot any OC3 circuit as well as test ATM equipment and services for proper operation and conformance. At the physical layer, the OC3port Plus can be used to diagnose many common OC3 network problems. The tester provides complete OC3 Section, Line, and Path error and alarm transmission and monitoring capabilities that enable you to effectively monitor and test OC3 networks from any access point.   Fotec FM310 Fotec FM310 Fiberoptic Power Meter Home   Gigatronics 80301A Gigatronics 80301A Power Sensor Home The Gigatronics Model 80301A CW Power Sensor lets you measure CW power from 10 MHz to 18 GHz at more than 1,750 readings per second over IEEE-488. The 80301A measures from -70 to +20 dBm.   Agilent 70810B HP Agilent 70810B Lightwave Section with Option 850: 750 to 870nm Home The 70810B lightwave section is a lightwave receiver module for the 70000 modular measurement system (MMS). Consisting of an optical attenuator, broadband photodetector, microwave preamplifier, and optical power meter, the module combines with a 70000 series spectrum analyzer to create an Agilent 71400-series lightwave signal analyzer. The lightwave section has a wavelength range of 750 to 870nm, a detected modulation bandwidth of 100kHz to 22GHz, and a built-in RF amplifier of 32dB that provides optical sensitivity of -60dBm in a 10Hz bandwidth. The module also features both optical and electrical input capabilities. Optical-to-electrical conversion with variable optical attenuation and amplified RF output Wavelength Range: 750 to 870nm Frequency Range: 100kHz - 22GHz   Agilent 70810B HP Agilent 70810B Lightwave Section: 1200 to 1600nm Home The 70810B lightwave section is a lightwave receiver module for the 70000 modular measurement system (MMS). Consisting of an optical attenuator, broadband photodetector, microwave preamplifier, and optical power meter, the module combines with a 70000 series spectrum analyzer to create an Agilent 71400-series lightwave signal analyzer. The lightwave section has a wavelength range of 1200 to 1600nm, a detected modulation bandwidth of 100kHz to 22GHz, and a built-in RF amplifier of 32dB that provides optical sensitivity of -60dBm in a 10Hz bandwidth. The module also features both optical and electrical input capabilities. Optical-to-electrical conversion with variable optical attenuation and amplified RF output Wavelength Range: 1200 to 1600nm Frequency Range: 100kHz to 22GHz   Agilent 8151A HP Agilent 8151A Optical Pulse Power Meter Home HP Agilent 8151A Pulse Power Meter.   Agilent 8152A HP Agilent 8152A Optical Power Meter Home The HP 8152A Optical Power Meter offers accuracy and versatility for absolute and relative power measurements in a lightwave test environment. All functions can be set from the front panel or programmed via the HP-IB. Requires 81520A/21B/22A head, not included. This unit passes all start up tests.   Agilent 81536A HP Agilent 81536A Power Sensor: 800-1700nm Home Specifications: Sensor Element: InGaAs Wavelength Range: 800 - 1700nm Power Range: +3 to -70dBm Uncertainty at Reference Conditions: ±2.5% (1000 - 1650nm) Total Uncertainty: ±5% ±50pW (1000 - 1650nm)   Agilent 83485A HP Agilent 83485A 20 GHz/20 Opt 2488 Mb/S filter Home The 83485A module has two measurement channels: one optical. one electrical. Each channel has two selectable bandwidth settings. In the lower bandwidth mode: of 12.4 GHz, oscilloscope noise performance is excellent, while the 20 GHz mode provides greater fidelity for high-speed signals. The optical channel: is calibrated at 1310 nm and 1550nm. It also has a switchable filter to produce a calibrated SDH/SONET reference receiver.   Agilent 83485A HP Agilent 83485A Optical Electrical Channel 20 GHz Plug-In Module with Option 034,UK6 Home The 83485A module has two measurement channels: one optical. one electrical. Each channel has two selectable bandwidth settings. In the lower bandwidth mode: of 12.4 GHz, oscilloscope noise performance is excellent, while the 20 GHz mode provides greater fidelity for high-speed signals. The optical channel: is calibrated at 1310 nm and 1550nm. It also has a switchable filter to produce a calibrated SDH/SONET reference receiver.   Agilent 83485A HP Agilent 83485A Optical Electrical Channel 20 GHz Plug-In Module with Option H28 Home The 83485A module has two measurement channels: one optical. one electrical. Each channel has two selectable bandwidth settings. In the lower bandwidth mode: of 12.4 GHz, oscilloscope noise performance is excellent, while the 20 GHz mode provides greater fidelity for high-speed signals. The optical channel: is calibrated at 1310 nm and 1550nm. It also has a switchable filter to produce a calibrated SDH/SONET reference receiver.   Agilent E5574A HP Agilent E5574A Optical Loss Analyzer w/opt 15&20 Home The E5574A optical loss analyzer is a complete solution for the loss/gain characterization of active and passive optical components. At the touch of a button, you can measure the various contributions to the total loss of your device- all together in one affordable instrument. It is especially optimized for polarization dependant loss and gain measurements with a typical PDL accuracy of 0.001dB. Wavelength: 1250-1600nm Complete loss analysis solution Precise absolute power measurements Optimized for polarization dependant loss(PDL)   ILX FPM8200 ILX FPM-8200 Fiber Optic Power Meter Home Specs: NIST traceable calibration from 800-1600 nm. Measures from -75 dBm to + 1.5 dBm. Analog output for alignment feedback control. Standard GPIB/IEEE 488.2 Interface.   ILX OMM-6810B ILX Lightwave OMM-6810B Optical Multimeter w/ ILX Lightwave OMH-6722B Silicon power/Wavehead Home   ILX OMH-6745B ILX Lightwwave OMH-6756B Fiber Optic Power/Wavehead Home   JDS OPM16 JDS OPM-16 Optical Power Meter Home Used JDS OPM-16 Optical Power Meter. The "black tube" is a photodetector for the OPM-16 optical power meter. Its principal response is at at 1510 nM, with about half the response at 1310 nM. The power meter has been tested on 2/11/2010 and is working fine - it can be operated at 980, 1310 or 1550 nM.   LaserMate Coherent LD-3 Sensor & LD-1 Sensor Lasermate Coherent LD-3 Sensor & LD-1 Sensor Home   RIFOCS Corp. 578L RIFOCS Corp. 578L Power Meter - *No Detector Head Home 578L Power Meter - InGaAs Detector: -60 dBm to +20dBm. The RIFOCS meter does not have a detector head.   Tektronix TFC200 Tektronix TFC200 Optical Power Meter Home This is a used Tektronix TFC200 Optical Power Meter. * 3% Accuracy (1% typical) * Selectable dB Threshold Audio Indicator * Readouts in dBm, dB and Watts * Multiple Calibrated Wavelengths: 780, 820, 850, 1060, 1300, 1310 and 1550 * Non-volatile Storage of Reference Power Level for Each Wavelength * Averaging * Analog Output Port * Easy-to-use, Intuitive User Interface * Large, Backlit LCD Display Is Easy to Read in Direct Sunlight or Total Darkness * Battery or AC/DC Operation * Wide Selection of Connector Adapters * Interfaces to Multimode and Singlemode Fiber   ©1999-2002 [fill in company name] All Rights Reserved contact webmaster | powered by corezon All logos and trademarks are properties of their respective companies. Product price, specification, warranty and availability subject to change without notice.