|
Mfg. Name |
Mfg. Part# |
Product |
|
Add To Cart |
| |
| |
Tektronix
|
OTS 9010
|
*Coming Soon* Tektronix OTS9010 Optical Test Systems
|
Home
|
|
|
Items are in the Building but in the test process |
| |
| |
Tektronix
|
OTS 9030
|
*Coming Soon* Tektronix OTS 9030 Optical Test System
|
Home
|
|
|
Items are in the building but in the test process |
| |
| |
HP
|
5010-7709
|
5010-7709 DFB, FP, and LED Measurement Personalities
|
Home
|
|
|
|
| |
| |
Fotec
|
A232
|
A232 Fiber Adapter Lot of 5
|
Home
|
|
|
|
| |
| |
Acterna
|
ONT-50
|
Acterna ONT-50 Optical Network Tester
|
Home
|
|
|
The Acterna ONT-50 Optical Network Tester addresses the need for evaluating fully interworking New Generation SONET/SDH (NewSONET/NewSDH) with Ethernet services at electrical and optical interfaces.
Software version 1.00
Backplane device version 3070/01
Firmware version 65535
|
| |
| |
Advantest
|
Q7750
|
Advantest Q7750 Optical Network Analyzer Opt. 10
|
Home
|
|
|
Q7750 is the first network optical analyzer to allow the accurate characterization of all passive WDM components with a single instrument. In contrast to RF network analyzers operating with opto-electric converters, Q7750 performs scans in the optical range.
It contains a continuously tunable laser for determining the transmission, reflection and chromatic dispersion of the modules. This previously required the use of several instruments. As a result the user obtains a readout of level and delay values at optical wavelengths. This allows, for instance, the measurement of group delay for a wavelength splitter within a WDM channel.
This is a used unit, with various small scratches, and excellent operational condition.
Installed Options: 10 - Optical output for monitoring wavelength FC/PC Optical Connectors
S/N: 11597
Included cables:
DCB-FF0388X06 N Cable x4
DCB-RR9980X01 I/O Cable x1
DCB-SS1076X01 GPIB Cable x1
Power Cables x2
Unit comes as shown, no other accessories are included.
Unit comes with Operating Manual on CD-ROM in PDF format.
|
| |
| |
ANDO
|
AQ7110 AQ7113
|
Ando AQ7110 Optical Fiber Analyzer w/ AQ7113
|
Home
|
|
|
Ando AQ7110 Optical Fiber Analyzer with the AQ7113 Single Mode Fiber Unit.
Ando AQ7110 portable OTDR
1310 & 1550 nm wavelength.
Printer and GPIB control.
dB scale= 0.2 dB/div to 5 dB/div
distance range= 5 meters to 128 km
Estimated dead zone 5 meters.
AQ-7113 module
Single-mode Fiber Unit 1.31um Band
FC connection
|
| |
| |
Digital Lightwave
|
ASA-PKG-OC48
|
Digital Lightwave ASA-PKG-OC48 Network Information Computer
|
Home
|
|
|
|
| |
| |
EXFO
|
IQ-3100
|
Exfo IQ-3100 Variable Attenuator: IQ-3100-BW91
|
Home
|
|
|
Exfo IQ-3100 Variable Attenuator.
Features:
- Fully programmable, offers reliable and repeatable performance and is ideal for automated BER testing.
- The IQ-3100-BW and BWM: configurations provide an excellent spectral uniformity, which allows you to maintain constant attenuation values throughout the complete WDM spectrum when characterizing EDFAs or subsystems.
- Maximum attenuation of 100 dB.
- Spectral resolution of 0.1 nm.
- Typical <1.5 dB insertion loss.
|
| |
| |
EXFO
|
IQ-5100 IQ-5101-58
|
Exfo IQ-5100 (IQ-5101-58) Polarization Controller
|
Home
|
|
|
The IQ-5100 is a polarization controller. Full part number is IQ-5101-58.
The IQ-5100 Polarization Controller, engineered for the IQ-200 Optical Test System, provides continuous random scanning over all possible states of polarization. This module is ideal for measuring the PDL of WDW and passive components such as couplers, isolators, and Bragg gratings. It can be used for any measurement application requiring controlled or varying states of polarization.
|
| |
| |
EXFO
|
IQ-9100-2-02-B-58
|
Exfo IQ-9100-2-02-B-58 SM 2x2 Fiber-Optic Switch Module FC/APC narrow key connectors
|
Home
|
|
|
The Exfo IQ-9100 has a crosstalk of -80 dB and a life expectancy of 10 million cycles. The Exfo IQ-9100 is ideal for bidirectional component testing, ribbon fiber testing, multichannel monitoring, remote and multiple-component testing, signal routing and bypass switching. Full part number: IQ9100-2-02-B-58. 2x2, 9/125um singlemode, FC/APC narrow key connectors.
|
| |
| |
EXFO
|
IQ-9601
|
Exfo IQ-9601-03-EI-B05 Utility Module Splitter
|
Home
|
|
|
Model #: IQ-9601-03-EI-B05.
|
| |
| |
EXFO
|
IQ-9601
|
Exfo IQ-9601-03-EI-B10 Utility Module Splitter
|
Home
|
|
|
Mode: 1x2.
Coupling ratio on 1x2 coupler: 95/5.
Ver: 1.
Model #: IQ-9601-03-EI-B10.
|
| |
| |
HP
|
83400A
|
HP 83400A Lightwave Source 300 kHz-3GHz w/ Opt 012
|
Home
|
|
|
Our used Hp 83400A is a Light Wave Source 300 kHz-3GHz w/Option 012. This unit works with the 8702 Lightwave Analyzer.
|
| |
| |
HP
|
83411C
|
HP 83411C Lightwave Receiver 300 kHz - 3 GHz w/ Opt 012, H12
|
Home
|
|
|
The Hewlett Packard / Agilent 83411C is a Lightwave Receiver Module. The 83411C has a wavelength of 1300nm/1550nm. The 83411C is used with the 8702B.
Option 012: Lightwave Receiver
|
| |
| |
HP
|
16191A
|
Hp Agilent 16191A Test Fixture
|
Home
|
|
|
This is a used Hp Agilent 16191A Test Fixture. The minimum SMD size that this fixture is adapted to evaluate is 2(L)[mm]. |
| |
| |
Agilent
|
81050BL
|
HP Agilent 81050BL Lens Multimode
|
Home
|
|
|
HP Agilent 81050BL Lens Multimode 900-1700nm.
|
| |
| |
Agilent
|
83430A
|
HP Agilent 83430A Lightwave Transmitter
|
Home
|
|
|
Our used Agilent 83430A is a modulatable DFB laser source that converts digital input signals to a preset optical output level that is SDH / SONET compliant.
It is designed to evaluate the performance of high-speed TDM (time division multiplexed) and WDM (wavelength division multiplexed) optical receivers and systems to SDH/SONET OC-1 (51.84 Mb/s) through STM-16/OC-48 (2.488 Gb/s) standards. Specifications:
- SDH / SONET compliant
- 52, 155, 622 and 2488 MB/s rates
- User adjustable extinction ratio
Standard unit: 1550 +/-1nm center wavelength
|
| |
| |
Agilent
|
83430A
|
HP Agilent 83430A Lightwave Transmitter with Option 130
|
Home
|
|
|
The Agilent 83430A is a modulatable DFB laser source that converts digital input signals to a preset optical output level that is SDH / SONET compliant. It is designed to evaluate the performance of high-speed TDM (time division multiplexed) and WDM (wavelength division multiplexed) optical receivers and systems to SDH/SONET OC-1 (51.84 Mb/s) through STM-16/OC-48 (2.488 Gb/s) standards. Specifications:
- SDH / SONET compliant
- 52, 155, 622 and 2488 MB/s rates
- User adjustable extinction ratio
Option 130: 1310 +/-20nm center wavelength
|
| |
| |
HP
|
83437A
|
Hp Agilent 83437A BroadBand Light Source OPT 022,UK6
|
Home
|
|
|
Hp Agilent 83437A BroadBand Light Source OPT 022,UK6 |
| |
| |
Agilent
|
83446A
|
HP Agilent 83446A Lightwave Clock Data Receiver
|
Home
|
|
|
HP Agilent 83446A Lightwave Clock/Data Receiver (STM-16/0C-48).
|
| |
| |
Agilent
|
83446B
|
HP Agilent 83446B Lightwave Clock Data Reciever
|
Home
|
|
|
HP Agilent 83446B Lightwave Clock Data Reciever.
|
| |
| |
Agilent
|
83447A
|
HP Agilent 83447A Lightwave Trigger
|
Home
|
|
|
HP Agilent 83447A Lightwave Trigger.
|
| |
| |
Agilent
|
86121A
|
HP Agilent 86121A WMD Channel Analyzer Option 022
|
Home
|
|
|
The HP 86121A is a high performance Michelson interferometer based channel analyzer for installation, commissioning, maintenance and monitoring of dense wavelength division multiplexed(DWDM) systems. It is designed for easy, accurate and complete characterization of up to 200 simultaneous optical carries. extremely accurate measurements of channel wavelength, powers and optical signal-to-noise ratio are obtained easily with single button operation. the simplified user interfaces makes advanced measurements like channel spacing and drift easily.
- Up to 200 WDM channels characterized with single keystroke operation
- Unparalleled ruggedness
- ±2 ppm absolute wavelength accuracy
- Lightweight and portable
- Built in printer and disk drive
- On board serial and parallel interfaces
|
| |
| |
ILX
|
LPA-9072
|
ILX Lightwave LPA-9072 Laser Diode
|
Home
|
|
|
ILX Lightwave LPA9072 Laser Diode. 500 mA maximum output current, current setpoint accuracy 4 uA. With bipolar constant current source temperature controller.
|
| |
| |
ILX
|
MPS-8012
|
ILX MPS-8012 Fiber Optic Source
|
Home
|
|
|
ILX MPS-8012 fiber optic source: single 1550nm DFB LD output.
|
| |
| |
ILX
|
MPS-8033/03
|
ILX MPS-8033/03 Precision Fiber Optic Source
|
Home
|
|
|
The MPS-8033 series of fiber optic sources are
microprocessor controlled laser diode sources, capable of providing up to 30 mW of power at user-specified wavelengths including WDM C-Band and L-Band wavelengths. Designed for component testing, power meter calibration, and general laboratory use, the MPS-8033 sources utilize proven precision laser diode temperature and current control electronics technology developed by ILX Lightwave.
Plus, each MPS-8033 comes equipped with a standard GPIB remote interface for easy incorporation into production automated test system or computer controlled laboratory test. /03 designates 1550 nm, DFB with optical isolator.
|
| |
| |
IPG Photonics
|
|
IPG Photonics EAM-125X4-C3 LASER DRIVER
|
Home
|
|
|
|
| |
| |
JDS
|
MTA150
|
JDS MTA150 / MTAS7+1010NCN GPIB Control Cassette
|
Home
|
|
|
JDS MTA150 GPIB Mainframe Remote Contol Module, Front panel keypad, LCD Display, GPIB, SCPI compatible
The MTA150 works in the MTA attenuator shelf
|
| |
| |
Laser Precision Corp.
|
TDR 9950
|
Laser Precision Corp TDR 9950 Reflectometer
|
Home
|
|
|
This is a used Laser Precision TDR 9950 Reflectometer |
| |
| |
Melles Griot
|
17DRV001
|
Melles Griot 17DRV001 Stepper Motor Driver for NanoMax-HS
|
Home
|
|
|
The 17 DRV 001 QuickInstall stepper-motor drive is one of a series of precision actuators which are easy to install and remove without tools.
The 17 DRV 001 stands apart from other stepper-motor drives because of its 20-kg load capacity and 50-nm resolution.
* 8 mm of travel with 50-nm resolution
* Interchangeable with QuickInstall thumbscrew, differential, and piezoelectric actuators
* High load capacity up to 20 kg (44 lb)
|
| |
| |
Melles Griot
|
17MAX303
|
Melles Griot 17MAX303 Three-Axis Nanopositioning Stage
|
Home
|
|
|
The 17MAX303 is a three-axis nanopositioning stage.
|
| |
| |
Melles Griot
|
17MPZ001
|
Melles Griot 17MPZ001 PiezoElectric Controller Module
|
Home
|
|
|
The 17MPZ001 is a PiezoElectric controller module.
|
| |
| |
Melles Griot
|
17MST001-6
|
Melles Griot 17MST001-6 Stepper Motor Control Module
|
Home
|
|
|
This Melles Griot 17MST001 Single-Axis Stepper-Motor Control Module is used and in excellent condition. Cabling is sold separately.
The Melles Griot 17MST001 Single-Axis Stepper-Motor Control Module provides full microstep control of all stepper-motordrive and park parameters. The default parameters supplied are suitable for most applications. If required, the user has control offundamental low-level parameters such as initial and final velocities,acceleration, deceleration, backlash correction, and park position drive current.
|
| |
| |
Newport
|
ESA-C
|
Newport ESA-C u Drive Controller
|
Home
|
|
|
Newport Model number ESA-C u Drive Controller.
|
| |
| |
Noyes AFL
|
OFS300
|
Noyes OFS300 Optical Fiber Scope
|
Home
|
|
|
|
| |
| |
Tektronix
|
OTS91L3
|
Tektronix /Digital Lightwave OTS91L3 10GB Receive Card
|
Home
|
|
|
Tektronix OTS91L3 10GB RECEIVE Card.
|
| |
| |
Tektronix
|
OTS 9040
|
Tektronix OTS 9040 Optical Test Systems
|
Home
|
|
|
Tektronix OTS 9040 Optical Test Systems. |
| |
| |
Tektronix
|
TFS2020
|
Tektronix TFS2020 FiberScout Handheld Optical Fault Finder
|
Home
|
|
|
The TFS2020 FiberScout handheld optical fault finder is compact, lightweight and battery operated, making it easy to take it practically anywhere.
The FiberScout interprets the data for the user and provides a symbolic display that automatically identifies events and displays information about loss and distance.
To determine a fiber's condition, simply connect the TFS2020 FiberScout to the fiber, turn it on and press the Start Test button. The fiber is automatically tested, and the results are displayed in straightforward manner with words and symbols. No mathematics to remember. No complex equations to use. No backscatter signals to interpret.
The Universal Short Range Port has an optical output wavelength of 850nm and a distance accuracy of +/-2m. The Long Range Port wavelength is 1300nm with a distance accuracy of +/-5m.
|
| |
| |
Tektronix
|
OTS91L1
|
Tektronix/Digital Lightwave OTS91L1 SONET/SDH Optical Test Module
|
Home
|
|
|
Tektronix OTS91L1 SONET/SDH Optical Test Module. |
| |
| |
Tektronix
|
OTS92H1
|
Tektronix/Digital Lightwave OTS92H1
|
Home
|
|
|
Tektronix OTS92H1. |
| |
| |
Tektronix
|
OTS93T1
|
Tektronix/Digital Lightwave OTS93T1 155M/2.5G
|
Home
|
|
|
Tektronix OTS93T1. |
| |
| |
Wandel and Goltermann
|
OLP-130
|
Wandel and Goltermann OLP-130 Optical Power Meter Module 800-1600nm
|
Home
|
|
|
Wandel & Goltermann OLP-130 Optical Power Meter Module 800-1600nm.
|
| |
| |
Wandel and Goltermann
|
OMS-200
|
Wandel and Goltermann OMS-200 Optical Measuring System Mainframe
|
Home
|
|
|
The Wandel & Goltermann OMS-200 Optical Measuring Mainframe has 8 mainframe slots, making it ideal for applications in production and production testing. The system is remotely controlled via a PC/controller. The LabWindows drivers for all modules allow straightforward programming of test and evaluation routines.
|
| |
| |
Wandel and Goltermann
|
PKN-1
|
Wandel and Goltermann PKN-1 Line Simulator
|
Home
|
|
|
Wandel & Goltermann PKN-1 Line Simulator: 1kHz-10MHz.
|
| |
| |
Westover Scientific
|
FBP-HD1
|
Westover FBP-HD1 Handheld Fiber Optic Display
|
Home
|
|
|
Westover continues to lead the industry by providing ruggedized drop-tested liquid crystal displays (LCD's) for handheld field use. We offer three primary solutions and several options within these categories.
The HD1 display offers the highest level of performance and proven success. Features include:
¿ 3.5¿ TFT LCD with front-mounted contrast adjustment
¿ Removable Sony® Li-ion battery with 3 hours continuous run time (extended using auto-shutoff feature)
¿ Built-in power management system
¿ Adjustable auto-shutoff feature to preserve battery life. Settings for 15 seconds, 30 seconds, 60 seconds and infinite run
¿ Fuel gauge showing remaining battery life
¿ Built-in charge feature so you can use while you charge
¿ Built-in hanging accessory for hands free operation
¿ Used with any NTSC "FBP" or "FBP3" series probe |
| |
