Go to Our Web Site 		 
This is our product index page. Please use the keyword searching to narrow down the result. Or try our Advanced Search function.
  
 
<%-- ************************************************************ HTML Content Started Here ************************************************************ --%>
Category  : Digital Power Supplies

Mfg. Name Mfg. Part# Product Add To Cart
 
Agilent E3631A Agilent E3631A 0-6v,5A\0-+25v,1A Triple Output DC Power Supply Home
Our used HP Agilent E3631A DC Power supply is a dual range single output power supply of 6V/5A or 25V/1A with CV or CC operation with overvoltage and overcurrent protection.It features a combination of programming capabilities via the front panel or remotely over the standard GPIB or RS-232 interfaces.
 
BK Precision 1760 BK Precision 1760 32/ 32/ 4-6.5 V, 5 AMP, Triple Output DC Power Supply. Home
  • Two 0-30 VDC, 2 A sections capable of independent, series or parallel operation
  • One 4-6.5 VDC, 5 A section
  • Switchable series/parallel operation - 30 V sections
  • Adjustable current limit controls - 30 V sections
  • Two 3 digit LED displays - one reads volts or amps of "B" supply - one reads volts or amps of "A" supply or 4V-6.5V supply
  • Unique variable tracking, B track A at 5% to 100%
    •  
    Sorensen DCS 60-50 DCS 60-50 Power Supply Home
    The DCS 60-50 is one of our power supplies. The Sorensen DCS60-50, 60V, 3 kW DC Programmable Switching Power Supply incorporates current mode switching rates up to 100 kHz in high power density, low profile chassis. Utilizing unique packaging techniques, the DCS60-50 provides full output power (3 kW) in any volt/amp combination within the rated output voltage and current limits. The DCS60-50 has 10 turn potentiometers to adjust voltage and current settings that are displayed simultaneously. LEDs inindicate overtemperature, remote programing, shutdown and overvoltage protection, status and constant-voltage/current mode operation. The DCS60-50 has push button control of the output standby mode, OVP reset, remote/local programming and preview status of voltage, current and OVP setpoints.
     
    EMS 5.5-150-1-D EMS 5.5-150-1-D Power Supply 5.5V 150A Home
    The New EMS series are high power switch mode AC to DC power supplies for applications where high efficiency, precise regulation and a high degree of packing density and light weight are required.

    Specifications:
    • Output Voltage: 5.5 VDC.
    • Output Current (Amps): 150.
    • Input Voltage: 190-250 VAC.
    • Input Frequency: 50-60 Hz.
    • Input Phase/Amps: 3 P @ 23 A.
     
    Global Specialties 1332A Global Specialties 1332A DC Power Supply Home
    Global Specialties 1332A DC Power Supply
    Single output
    Short circuit protected
    Heavy duty transformer isolated design
    Continuously Variable with Coarse and Fine Controls
    0-32 V/0-5 A
    Short Circuit Protected
    Two Digital Readouts Monitor Current and Voltage Simultaneously
    Constant Voltage or Constant Current Mode with LED Indicators
    Heavy-Duty Transformer Isolated Design
     
    HP 6614C HP 6614C DC Power Supply Home
    Agilent high performance DC power supplies offer speed and accuracy for test optimization. The single output, 40-50 W GPIB 6611C-6614C provide small, compact size for bench and system use; fast, low-noise outputs; and dual-range, precision low current measurement. The Agilent 50W, single output 6614C is a versatile low-power solution designed for demanding applications, and is a one-box solution that includes extensive measurement capabilities and built-in GPIB and RS-232 interfaces.
     
    Agilent 6023A HP Agilent 6023A Power Supply 0-20V - 0-30A - 200W Home
    HP Agilent 6023A Power Supply:
    This power supply specs are: 0-20V - 0-30A - 200W.

     
    HP 6033A Hp Agilent 6033A 0-20V/0-30A,200W System Power Supply Home
    The HP Agilent 6033A is part of the 603x family of used power supplies which provide a wide and continuous range of output voltage and current levels at the rated power output. They provide great flexibility for applications with varied or changing needs.
     
    Agilent 6034L HP Agilent 6034L DC Power Supply 60V, 10A Home
    This HP Agilent 6034L is one of our used DC Power Supply.
    The product description is as follows
    * 200 W System Power Supply
    * 0-60 V, 0-10A, 200 W Max
    * HPIB Programming of voltage current & OVP
    * HPIB measurement of voltage & current
     
    Agilent 6034L HP Agilent 6034L DC Power Supply w/ Opt 100 Home
    This HP Agilent 6034L is one of our used DC Power Supply.
    The product description is as follows
    * 200 W System Power Supply
    * 0-60 V, 0-10A, 200 W Max
    * HPIB Programming of voltage current & OVP
    * HPIB measurement of voltage & current

    With option 100: 50V option

     
    Agilent 6038L HP Agilent 6038L DC Power Supply with Option 001 Home
    The 6038L is a 0-60v, 0-10a, 200w max autoranging DC power supply.
     
    Agilent 6542A HP Agilent 6542A 200 Watt Power Supply Home
    The HP 6542A is a 200 Watt, single output, series pass regulated power supply, with front panel and analog programming of output voltage and current. Up to five front panel settings can be stored in nonvolatile storage for later recall. The 6542A features an output rating of 0-20V and 0-10A. It also has over-voltage and over-current protection, as well as over-temperature protection.
    • Output: 0-20V, 0-10A (200W)
    • Analog programming of output voltage and current
    • Self-test initiated at power-up
    • Five nonvolatile store and recall states
    • User-defined power-on state
    • Fan-speed control to minimize acoustic noise
    • Over-voltage and over-current protection
    • Over-temperature protection
     
    Agilent 6544A HP Agilent 6544A 200W DC System Power Supply: 0 to 60v, 0 to 3.5a Home
    HP Agilent 6544A 200W DC System Power Supply. Offers the right mix of performance and functionality for general purpose applications on the bench or in analog-controlled systems. 0 to 60v, 0 to 3.5a.
     
    Agilent 66102A HP Agilent 66102A DC Power Module For 66000A MPS Home
    The 66102A is our used DC Power Module for 66000A MPS mainframe; 20V 7.5A. Please note: The corner of the face place is damaged.

    The HP / Agilent 66102A Power Module is used in the HP-Agilent 66000 Modular Power System (MPS) mainframe to provide up to 20 Volts DC and 7.5 Amps DC. The HP-Agilent 66102A are installed or removed from the front of the mainframe without the need for disconnecting any wires. The module may be connected in series or parallel with other modules to provide increased voltages or currents.
     
    HP 6612B Hp Agilent 6612B DC Power Supply Home
    The HP 6612B is benchtop DC power supply. This unit has overvoltage protection, overcurrent protection, over-temperature protection, and local lockout.
    • DC Output: 20V, 2A
    • Voltage ripple/noise: 500µV
    • Current ripple/noise: 2mA
    • Load regulation voltage/current: 2mV/0.5mA
    • Line regulation voltage/current: 0.5mV/0.5mA
     
    Agilent 6625A HP Agilent 6625A 50 Watt Dual Output DC System Power Supply Home
    Agilent high performance DC power supplies offer spec and accuracy for test optimization. The precision multiple output, 25W - 50W GPIB 6625A provide fast, low-noise outputs; dual-range, precision low current measurement; built-in measurements and advanced programmable features; and protection features to ensure DUT safety. The Agilent 50W, dual-output 6625A is a versatile solution help improve system accuracy and reduce test time in a 3U high package.

    Output 1:
    Range 1: 0.105w, 7v, 15ma
    Range 2: 25w, 50v, 500ma

    Output 2:
    Range 1: 3.2w, 16v, 200ma
    Range 2: 50w, 50v, 1a
    Range 3: 32w, 16v, 2a
     
    Agilent 6627A HP Agilent 6627A System DC Quad Power Supply 0-20V - 0-2A w/ opt 750 Home
    The 6627A Power Supply:
    Is a four output supply with low ripple and noise. It has a power output of 40 W. Each output features two linear ranges. The unit has: a low range rating of 0 to 20 V @ 2 A and a high range rating of 0 to 50 V @ 0.8 A. All four outputs are identical: Metered Programmable Regulation = 0.01% CV/CC.

    Has option 750
     
    Agilent 6632B HP Agilent 6632B DC Power Supply 0-20V - 0-5A Home
    The 6632B System DC Power Supply: is an ideal power source for demanding production test applications. This dc power supply: offers high performance and precision measurements in a one-box solution. To reduce test-system development time and provide precision testing, the 6632B provides current measurement down to the microamp level. The 6632B: also provides high-speed programming with under 4 millisecond response time.

     
    Agilent 6645A HP Agilent 6645A 200 Watt DC Power Supply: 0-120V/0-1.5A opt jo5 Home
    The Agilent 6645A: is one of the 664x series of 200 Watt, single output, series pass regulated power supplies, with an internal GPIB interface and SCPI programming. These models provide: many talker/listener functions including remote programming of voltage and current with feedback of actual measured output values. 16 supplies: can be connected to one GPIB interface via a serial link connection. Auto-parallel: Auto-parallel up to three units. Outputs: Outputs can be connected in parallel or in series. Programmable: Programmable over-voltage and over-current protection.

     
    Agilent E3614A HP Agilent E3614A DC Power Supply Home
    The Agilent E3614A 48 watt power supply is used when you need a hefty power supply for your bench with clean, stable power. In addition to constant current and constant voltage modes, you get adjustable over-voltage protection, remote analog programming, front/rear output terminals and remote sensing that automatically compensates for voltage drops.
    • 48W Single output.
    • 0-8v/0-6a.
    • Constant voltage (CV) and Constant current (CC) modes.
    • Front and rear output terminals.
    • Auto-parallel, Auto-series and Auto-tracking operation.
    • 10-turn voltage and current adjust potentiometers.
    • Overvoltage protection, remote analog programming, and remote sensing.
     
    Agilent E3617A HP Agilent E3617A DC Power Supply Home
    The Agilent E3617A 60 watt power supply is used when you need a hefty power supply for your bench with clean, stable power. In addition to constant current and constant voltage modes, you get adjustable overvoltage protection, remote analog programming, front/rear output terminals and remote sensing that automatically compensates for voltage drops.
    • 60W Single output.
    • 0-60v/0-1a.
    • Constant voltage (CV) and Constant current (CC) modes.
    • Front and rear output terminals.
    • Auto-parallel, Auto-series and Auto-tracking operation.
    • 10 turn voltage and current adjust potentiometers.
    • Overvoltage protection, remote analog programming and remote sensing.
     
    Agilent N3280A HP Agilent N3280A Component Test DC Source: 5 W, 4 Outputs NEW OPEN BOX w/ Opt 120 / 8ZJ Home
    The N3280A DC source offers semiconductor ATE manufacturers a reduction in test time, integration time, and rack space. It is a fast, low-power (+/-10V, +/-0.5A) bipolar power supply that is optimized for testing RF and mixed signal semiconductors.

    Valuable rack space is saved, by providing four bipolar outputs in a half rack box that eliminates the need for four separate sources and an external polarity reversal relay. It maximizes test system throughput by reducing the command processing time required for setting output levels and for acquiring measurements. The N3280A offers a precision measurement system that allows you to measure low-level (nA) currents.
     
    HP 6032A HP/Agilent 6032A DC Autoranging Power Supply, with OPT 001, 0-60V, 0-50A Home
    The HP Agilent 6032A is our used System DC Power Supply providing 0 to 60 volts from 0 to 50 amps, up to 1200 Watts output. The 6032A features GPIB programming via an IEEE-488 bus plus a serial link output permitting control of multiple units. Automatic switchover between constant current and constant voltage modes is standard.
    In addition to current limiting, the 6032A has over voltage protection and foldback limiting features with annunciator LED's on the front panel advising the operator of operating modes, status, and errors.
    The 6032A has easily viewable LED digital readouts of both voltage and current.
     
    HP 6553A HP/Agilent 6553A-J04 DC power supply, 0-40 V, 0-12.5 A, 525 W Home
    HP/Agilent 6553A-J04 DC power supply, 0-40 V, 0-12.5 A, 525 W.

    This reliable series of 525 W DC power supplies can be controlled either from the front panel or via an analog programming voltage. When used in a test system, the fast up and down programming helps decrease test time. Quickly reacting protection features, including fast crowbar, CV/CC mode crossover and over-voltage protection help protect your valuable assemblies from damage. The linear topology produces very low ripple and noise, which allows you to make extremely accurate measurements of the devices which you are testing.
     
    HP 6643A HP/Agilent 6643A DC Power Supply 0-35V/0-6A Home
    Our Hp 6643A is one of our used 200 W DC Power Supplies. These units come with GPIB with output ratings of 0 - 35 V, Current 0 - 6 A.
    These DC power supplies are designed to maximize the throuput of DUTs through the manufacturing test process with fast up and down programming time.
    Valuable assemblies can be destroyed by a minor component failue that can allow a surge of voltage or current to flow to the DUT. Fast protection features including fast crowbar, mode crosssover protection and the ability to connect the protection circuitry of multiple power supplies can increase production yield.
    Programming to the DC output and the protection features can be done either from the front panel or using the industry standard SCPI commands via the GPIB.
     
    Lambda EXX 120-0.5S Lambda / EMI EXX120-0.5 GPIB Programmable Power Supply Home
    Lambda / EMI EXX120-0.5 GPIB Programmable Power Supply.

    Features:

    • Model: EXX 120-0.5S.
    • GPIB.
    • S/N 55389.
    • Input: 115V/60Hz.
    • 1.2A Output: 0-120V. 0-0.5A.
     
    National Instruments PXI-4110 National Instruments NI PXI-4110 Prgrammable DC Power Supply Home
    Our used NI PXI-4110 triple-output programmable DC power supply combines traditional linear and switching power technologies by configuring the switcher as a tracking regulator, essentially creating a rail with variable headroom above the programmed output. The end result is a module with two isolated channels, one from 0 to +20 V and the other from 0 to -20 V, and a single nonisolated channel from 0 to 6 V, all capable of putting out up to 1 A per channel. These basic power output specs are complemented by excellent resolution and low noise for the PXI-4110 as a voltage or current source.
     
    Power Design 1579R-PM-3 Power Design 1579R-PM-3 Home
    Power Design 1579R-PM-3
     
    Power Design TP340A Power Design TP340A Triple Output DC Power Supply Home
    The Power Designs TP340A is our used triple output regulated DC power supply which is suitable for general-purpose laboratory and industrial applications. The TP340A features adjustable and independent current limiting and over-voltage crowbar protection for each output. A fault lamp indicates crowbar operation or an overload condition.
     
    PowerTen Inc 3350D-7.575 PowerTen Inc 3350D-7.575 DC Power Supply Home
    This is a used PowerTen Inc 350D 7.575 DC Power Supply
     
    Sorensen QRD15-2 QRD15-2 DC Power Supply Home
    A used QRD15-2 DC Power Supply.
     
    Sorensen DCR20-25B Sorensen DCR20-25B Power Supply Home
    The Sorenson DCR20-25B is one of our used power supplies. The DCR20-25B is a member of the 500W DCR-B family of general purpose, rackmount power supplies. It features dual analog panel meters, automatic crossover between constant voltage (CV) and constant current (CC), and over voltage protection (OVP). It provides voltages from 0-20V DC and currents up to 25 ADC.
     
    Sorensen DCR80-62T Sorensen DCR80-62T Digital Power Supply Home
    Sorensen DCR 80-62T Digital Power Supply.
     
    Xantrex XFR 7.5-300 Xantrex XFR 7.5-300 dc Power Supply Home
    This is a used Xantrex XFR 7.5-300 DC Power Supply

    * Output Voltage: 0-7.5 V
    * Output Current: 0-300 A
    * Output Power: 2250 W

    Line Regulation 2:
    * Voltage: 2.75 mV
    * Current: 32 mA
     
    Xantrex XTD 60-1 Xantrex XTD60-1 Power Supply Home
    XT 60-1 Digital Power Supply. 60V - 1A.

     



    ©1999-2002 [fill in company name] All Rights Reserved contact webmaster | powered by corezon
    All logos and trademarks are properties of their respective companies. Product price, specification, warranty and availability subject to change without notice.