Techrecovery - Power Products & Analyzers

<%-- ************************************************************ HTML Content Started Here ************************************************************ --%>

Mfg. Name	Mfg. Part#	Product		Add To Cart

ACDC Electronics	EL-301	ACDC EL301 Electronic Load Control Module	Home
The AC-DC Electronics EL301 Six Channel Control Module expands the operating range of the basic load. Up to six loads can be monitored and remotely programmed. Provides operational capability similar to the EL750B dynamic load (when used in conjunction with the load module).

ACDC Electronics	EL750R-2-1	ACDC Electronics EL750R-2-1 DC Electronic Load	Home
The EL750R-2-1 is two EL750 in a side-by-side rackmount configuration and allows selectable constant current or constant voltage operating mode with a 55v maximum input voltage, 150a maximum load current and 750 watt capability. Features continuously variable controls for input voltage, current and dynamic load, remote programming via rear-panel connection, and sensors which protect the unit from damage.

Acopian	A015HX800	Acopian A015HX800 0-15 Volt Adj Power Supply	Home
This is one of a broad selection: of power supplies offering broad adjustment capability required for analog instrumentation and circuitry, electronic system development, basic research, and similar applications. Voltage programmable using resistance. Specifications: Nominal Output Voltage: 0-15. Output Current Amps at: 40｡紊: 8.0 /55｡紊: 6.0 / 71｡紊: 4.0. Voltage Prgmg Coeff (ohms/V): 330. Case Size: H11 5.1 x 7.4 x 12.0 (inches). Weight: 18 lb. 4 oz. You know the Acopian name: and the quality behind it. Here is your chance to get one (or more) of their High Performance power supplies.

Acopian	A5MT600	Acopian A5MT600 Power Supply	Home
Series A High Performance (model numbers begin with the letter A) A broad selection of power supplies offering unusually high performance - many models have regulation of ｱ0.005%. Electronic current limiting and provision for remote voltage sensing are standard features; overvoltage protection is available as a built-in option. Rugged extruded aluminum cases include threaded mounting holes on bottom, back, and side, permitting mounting in any position. Provision for remote sensing and/or external output adjustment. Short circuit proof with automatic recovery (electronic current limiting). Series B General Purpose (model numbers begin with the letter B) These versatile supplies are ideal for powering digital circuitry, test sets, instrument bridges, and process control transmitters. Many models have regulation of ｱ0.1% or better. All components are generously derated to insure a long and trouble-free life, and they use the same rugged construction as the Series A line. Overvoltage protection and other options are available. Short circuit proof (electronic current limiting).

Acopian	B5G500	Acopian B5G500 5 Volt Power Supply	Home
These versatile supplies: are ideal for powering digital circuitry, test sets, instrument bridges, and process control transmitters. Many models have regulation of ｡ﾀ0.1% or better. All components: are generously derated to insure a long and trouble-free life, and they use the same rugged construction as the Series A line. Overvoltage protection and other options are available. Specifications: Nominal Output Voltage: 5 Adjust ｡ﾀ V: 0.5. Output Current Amps at: 40｡紊: 5.0 / 55｡紊: 4.4 / 71｡紊: 3.0 / Regulation Load ｡ﾀ %: 0.1/Regulation Line ｡ﾀ %: 0.15. Case Size: G6 3.4 x 5.1 x 7.4 (inches).Weight: 5 lb. 8 oz.

Acopian	TD12-250	Acopian TD12-250 ｱ12 Dual Output Power Supply	Home
This is one of a broad selection: of power supplies offering unusually high performance - many models have regulation of ｡ﾀ0.005%. Electronic current: limiting and provision for remote voltage sensing are standard features; overvoltage protection is available as a built-in option. Rugged: extruded aluminum cases include threaded mounting holes on bottom, back, and side, permitting mounting in any position. Short circuit proof: with automatic recovery (electronic current limiting). Specifications: Nominal Output Voltage: ｡ﾀ12 Adjust ｡ﾀ V: 1.0 Output Current Amps at: 40｡紊: 2.5 55｡紊: 2.0 71｡紊: 1.5 Case Size: TG9 3.4 x 5.1 x 9.8 (inches) Weight: 6 lb. 8 oz.

Acopian	TD12-450	Acopian TD12-450 ｱ12 Dual Output Power Supply	Home
This is one of a broad selection: of power supplies offering unusually high performance - many models have regulation of ｡ﾀ0.005%. Electronic current: limiting and provision for remote voltage sensing are standard features; overvoltage protection is available as a built-in option. Rugged: extruded aluminum cases include threaded mounting holes on bottom, back, and side, permitting mounting in any position. Short circuit proof: with automatic recovery (electronic current limiting). Specifications: Nominal Output Voltage: ｡ﾀ12 Adjust ｡ﾀ V: 0.5Output Current Amps at: 40｡紊: 4.5 55｡紊: 3.771｡紊: 3.0 Case Size: TG13 3.4 x 5.1 x 13.8 (inches) Weight: 12lbs.

Acopian	TD5-250	Acopian TD5-250 ｱ5 Dual Output Power Supply	Home
This is one of a broad selection: of power supplies offering unusually high performance - many models have regulation of ｡ﾀ0.005%. Electronic current: limiting and provision for remote voltage sensing are standard features; overvoltage protection is available as a built-in option. Rugged: extruded aluminum cases include threaded mounting holes on bottom, back, and side, permitting mounting in any position. Short circuit proof: with automatic recovery (electronic current limiting). Specifications: Nominal Output Voltage: ｡ﾀ5Adjust ｡ﾀ V: 0.5Output Current Amps at: 40｡紊: 2.5 55｡紊: 2.071｡紊: 1.5Case Size: TG9 3.4 x 5.1 x 9.8 (inches) Weight: 6lbs. 8 oz.

Acopian	V48PT5AF	Acopian V48PT5AF Power Supply	Home
This is one of a broad selection of power supplies offering unusually high performance. Electronic current: Limiting and provision for remote voltage sensing are standard features; overvoltage protection is available as a built-in option. Rugged extruded: Aluminum cases include threaded mounting holes on bottom, back, and side, permitting mounting in any position. Short circuit proof with automatic recovery (electronic current limiting).

HP	60504A	Agilent/HP 60504A (60V/120A/600W DC Electronic Load Module	Home
Agilent / HP The 60504A DC Electronic Load is ideal for the test and evaluation of dc power sources and power components. This load is well-suited for applications in areas such as R&D, production, and incoming inspection. This single-input load is equipped with built-in IEEE-488 interface which allows complete control of all load functions. The unit is rated from 3 to 60 V @ 120 A with a maximum power of 600 Watts.

Astec	AP6C64DA	Astec AP6C64DA Modular Power Unit AP6CC0PC	Home
Astec Power is a worldwide and leading supplier of standard, modified standard, custom AC/DC and DC/DC power supplies from 1 watt to 18,000 watts. Items specific to this unit: This is a NEW Open Box unit. 4 AP6CC0PC-03 Power Switch Modules. 1 AP6C66PC-01 Alarm Module. 1 Chassis. 1 Accessory Bag. No manual is included with this unit.

BK Precision	1735	BK Precision 1735 DC Power Supply	Home


N/A	PS-303D	Conrad Electronics PS-303D Power Supply	Home
Conrad Electronics PS-303D Power Supply

Diego Power	243	Diego Power 243 Power Monitor	Home
Used Diego Power 243 Power Monitor

EDC	MV106 G1	EDC MV106 G1 DC VOLTAGE STANDARD	Home


N/A	SP-2718	Heath Zenith SP-2718 TRI POWER SUPPLY	Home


HP	6634A	HP 6634A DC Power Supply	Home
This series of linear-regulated 80-100 W dc power supplies is designed to maximize the throughput of DUTs through the manufacturing test process. Both programming and measurement are optimized for speed. The active downprogrammer can sink up to the full rated current of the power supply, which quickly brings the power supply output to zero volts. The 6630B Series offers many advanced programmable features including stored states and status reporting. Programming is done using industry standard SCPI commands via the GPIB or RS-232. The 6634A Power Supply is a 100 watt, single output, series pass regulated supply is rated 100 V @ ｱ1 A. Both the voltage and current output can be programmed for either CV or CC operation. A built-in DCM and precision current shunt measure (readback) the actual power supply output. The internal HP-IB interface allows for complete programmability, including status reporting and interrupt generation with user designated fault conditions.

HP	6645A	Hp 6645A Dc Power Supply	Home
The Agilent 6645A: is one of the 664x series of 200 Watt, single output, series pass regulated power supplies, with an internal GPIB interface and SCPI programming. These models provide: many talker/listener functions including remote programming of voltage and current with feedback of actual measured output values. 16 supplies: can be connected to one GPIB interface via a serial link connection. Auto-parallel: Auto-parallel up to three units. Outputs: Outputs can be connected in parallel or in series. Programmable: Programmable over-voltage and over-current protection. Output voltage: 0 to 120V Output Current: 0 to 1.5A

HP	8483A	Hp 8483A Power Sensor	Home
The Agilent / HP 8483A Power Sensor is designed for use with the EPM series, EPM-P series, 70100A, E1416A and the 43x series power meters, and provides extraordinary accuracy and stability. The Agilent / HP 8483A power sensor is designed for use with the 435B, 436A, 437B, 438A, 70100A, and the E4418B and E4419B power meters. These thermocouple and diode power sensors provide extraordinary accuracy, stability, and SWR over a wide range of frequencies (100 kHz to 2 GHz) and power levels (+10 dBm to +20 dBm).

HP	85901A	HP 85901A AC Power Source	Home
The Agilent 85901A Portable AC Power Source works with your test equipment to provide the power you need, where you need it. The power source is small, with a briefcase handle that makes it easy to carry and it fits into tight spots. You can use the built-in battery of the power source or connect it to an external 12 Vdc source for even longer operation.

Agilent	4140A	HP Agilent 4140A DC Source (No Accessories)	Home
HP Agilent 4140A DC Source (No Accessories).

Agilent	4141B	HP Agilent 4141B DC Source	Home
HP Agilent 4141B DC Source.

Agilent	41424A	HP Agilent 41424A Voltage Source / Voltage Monitor Unit	Home
HP Agilent 41424A Voltage Source / Voltage Monitor Unit for HP Agilent 4142B Modular DC Source.

Agilent	59501B	HP Agilent 59501B Power Supply Programmer	Home
HP Agilent 59501B Power Supply Programmer. Features: Isolated digital-to-analog converter. Provides an interface between HP-IB and HP power supplies. Output mode: unipolar 0 to 9.99 V (low range 0 to 9.999 V). Serial Number: 2337A-02694.

HP	60501A	Hp Agilent 60501A 60V/30A 150W Load	Home
Our HP / Agilent 60501A is a used 60V / 30A, 150W Electronic Load Module designed for use in a 6050A or 6051A Electronic Load Mainframe. The 60501A is ideal for the test and evaluation of dc power sources and power components and is well suited for applications in areas such as research and development, production, and incoming inspection. The 60501A module includes programming inputs that allow control of load current via an analog control voltage. The 60501A features full protection from over-current, over-voltage, overpower, over-temperature, and reverse polarity. Power connections are made via large high-current binding posts which permit rapid connections by hand and eliminate the traditional bolt/nut connections of the past. Internal or external load sensing is available.

HP	60502A	HP Agilent 60502A 60V/60A/300W DC LOAD	Home
The Agilent HP 60502A DC Electronic Load is perfect for the test and evaluation of dc power sources and power components. This load is well suited for applications in areas such as R&D, production, and incoming inspection. This single-input load is equipped with built-in IEEE-488 interface that allows complete control of all load functions. The unit is rated from 3 to 60 V @ 60 A with a maximum power of 300 Watts.

HP		HP Agilent 6627A System DC Quad Power Supply 0-20V - 0-2A	Home
The 6627A is a Quad-Output DC Power Supply designed for system applications requiring multiple low ripple and noise voltages and fully programmable. The 6627A features four independent and isolated dual range outputs capable of 0-20 V at 4A or 0-50V at 2A. The 6627A has a voltage programming accuracy of 50 mV + 0.06% and current programming accuracy of 50 mA + 0.2%. The 6627A load regulation is 2 mV for voltage or 2 mA for current.

Agilent	66332A	HP Agilent 66332A 100 Watt Dynamic Measurement DC Source	Home
The Agilent 66332A Dynamic Measurement dc Source provides dynamic measurement and analysis of voltage and current waveforms. It is ideal for testing digital wireless communications products/components because it not only provides the power for testing, but also performs the peak current measurements required to characterize the pulsed current demands of these products. Features: Dynamic voltage and current pulse measurements. High accuracy current measurement. Current sinking. *Quality Control Information About This Instrument* As part of Techrecoveryｿs inbound quality control procedure, this instrument was calibrated by an accredited independent calibration lab to NIST traceable standards. The instrument was found to be within all OEM specifications. This instrument has been stored in our climate controlled warehouse and is guaranteed to perform according to original OEM specifications when purchased and throughout the warranty period. Should you require, a fresh calibration with certificate with one or two year time interval can be purchased for an additional charge.

Agilent	8349A	HP Agilent 8349A Microwave Amplifier	Home
HP Agilent 8349A Microwave Amplifier. The 8349A is a broadband, solid state Microwave Amplifier operating from 2 to 20 GHz. It provides >15 dB power gain. Maximum leveled output is +19 dBm. Many signal generators have reduced output levels at the upper end of their frequency range. The 8349A can be used to boost their outputs to levels sufficient for applications such as local oscillator use and antenna measurements. When used in scalar network systems, dynamic range can be increased 20 dB. The 8349A features a power level readout in conjuction with the internal leveling circuit so that and external power meter and directional coupler are not required to monitor the output.

Agilent	E4356A	HP Agilent E4356A Telecom DC Power Supply	Home
Agilent high performance DC power supplies offer speed and accuracy for test optimization. The single output, 2000 W GPIB E4356A provides dual range output; fast, low-noise outputs; analog control of output voltage and current; fan-speed control to minimize acoustic noise; and built-in measurements and advanced programmable features.

Agilent	N6735A	HP Agilent N6735A DC Power Module: 50 V, 0.8 A, 40 W	Home
The N6735A 40 W dc power module provides programmable voltage and current, measurement and protection features at a very economical price, making these modules suitable to power the DUT or to provide power for ATE system resources such as fixture control. This module is for use in the N6700 Low-Profile Modular Power System.

HP	4141A	HP/Agilent 4141A DC Source Monitor	Home
Used 4141A DC Source Monitor

HP	4141B	HP/Agilent 4141B DC Source Monitor	Home
The 4141B DC Source / Monitor is designed for use as a system component in user-designed semiconductor I-V or DC parametric test systems. With its wide DC measurement range, high resolution, high-speed measurement capabilities, remote sensing, and high accuracy, the 4141B will contribute towards quality improvement and increased measurement throughput in the lab or on the production line. The unit is rated DC to ｱ100V @ 20mA. It contains four source/monitor units and one ground unit.

HP	150B	Keithley 150B Microvolt Ammeter	Home
This Microvolt Ammeter measures voltage from 300nV to 1V (fs), and current from 3 x 10 to 3 x 10 amperes. Accuracy is 2% can also be used as a null detector. Small, solid state unit with built in battery supply. Key Points: * Accuracy is 2% * Solid state unit * Battery supply

Keithley	213	Keithley 213 Quad Voltage Source	Home
The Model 213 Quad Voltage Source (QVS) is a convenient and cost-effective instrument for sourcing voltage. Each of four fully independent and stackable channels provides up to ｱ10V of bias at 10mA. Features: GPIB controlled. Autoranging or programmable ｱ1V, ｱ5V, or ｱ10V ranges. 10mA output current per channel. Fast waveform buffers.

Keithley	227	Keithley 227 Current Source	Home
Keithley 227 Current Source. The 227 Current Source is designed for high-performance applications requiring an accurate, stable, high-power constant current over full-scale ranges of 1 mA to 1 A with adjustable compliance voltage (3-300 V to 100 mA, 3-50 V to 1A). The true bipolar current output can be modulated, programmed, monitored, and even floated up to 500 V off ground. Excellent regulation, stability, and low noise assure high resolution and accurate output.

Keithley	7058	Keithley 7058 Low Current Scanner Plug-In Card	Home
Keithley 7058 Low Current Scanner Plug-In Card

Kepco	CA-3	Kepco CA-3 Voltage Regulator	Home


Kepco		Kepco JQE15-6M Power Supply	Home


Kepco	RA19-3B	KEPCO RA19-3B POWER SUPPLY	Home


Lambda		Lambda EMI EMS13-90-1-D EMS Power Supply	Home


Lambda	LPD-421A-FM	Lambda LPD-421A-FM Dual Regulated Power Supply	Home
This is a used Lambda LPD-421A-FM Dual Regulated Power Supply

Leader	LPS152	Leader LPS152 2x 0-25V @ 1A and 0-6V @ 5A.	Home
Leader LPS152 2x 0-25V @ 1A and 0-6V @ 5A. Tracking mode. <3mV p-pk ripple

Noisecom	UFX-NPR-L/S	Noise/Com UFX-NPR L/S Noise Power Ratio Test (Transmitter)	Home
Noise/Com UFX-NPR L/S Noise Power Ratio Test

OneAC	CD31200	OneAC CD Series CD31200 Power Conditioner	Home
This is a used OneAC CD CD31200 Power conditioner. Specifications are available at: http://www.oneac.com/download/files/917035b.pdf Frequency: 50/60 Hz. Load Current Rating (Amps): 60 Output Rating (KVA): 21.6 Output Voltage: 208VAC 3P Wye Shipping Weight: 865 Lbs Dimensions (Inches): 27 W x 48.5 H x 22 D

OneAC	CSR10I	OneAC CSR Series CSR10I Single Phase Power Conditioner	Home
Specifications are available at: http://www.oneac.com/download/files/917185-.pdf P/N: CSR10I-23EK51 S/N: 0642-7673 Frequency: 50/60 Hz. Load Current Rating (Amps): 40 Output Rating (KVA): 9.6 Output Voltage: 240/120 VAC 1P Shipping Weight: 280 Lbs Dimensions (Inches): 14 W x 24 H x 17 D

Philips	PM2813	Phillips PM2813 Programmable Power Supply	Home
The Phillips PM2813 is a triple output power supply.The Fluke line of Programmable Power Supplies was created with automated testing in mind. The GPIB/IEEE-488 interface, output power module and output metering facilities are built in, taking up only two engineering units of rack height. The full rack-width models come equipped with rack mount ears for easy installation in a standard 19-inch rack. The front panel allows full access to all instrument functions, including voltage and current readback. A sequence of front panel settings can be created with the AUTOSTEP mode, quickly creating an automated test pattern of user-defined voltages and currents with no need for a controller. The optional front panel output gives the user easy access to both the power output connections and the sense lines; great for prototyping and temporary setups. Output Voltage: 0 to 60V Output Current: 0 to 10 A

Power Design		Power Design 4010 Precision Power Source	Home
This is one of our used Power Design 4010 Precision Power Source.

Power Mate	BPA-6E	Powermate BPA-6E Regulated Power Supply	Home


Rod-L		Rod- L 01120-04 Hipot/Ground Continuity Test Load	Home


Systron Donner	HB 20-6	Systron Donner HB 20-6 POWER SUPPLY	Home


Tektronix	1101A	Tektronix 1101A Power Supply	Home
The 1101A is one of our used Tektronix Power Supplies. It features: Powers up to Two Probes For Probe Use with Oscilloscopes That Do Not Have Probe Power Compatible with the P6201,P6202A and P6230 * Overload Protected * Variable DC Offset, up to ｱ200 V * Selectable 50 Ohm,Termination for use with 50 Ohm or 1 megaohm Inputs

Tektronix	AM503A	Tektronix AM503A Current Probe Amplifier	Home
Tektronix AM503A current probe amplifier.

Tektronix	TVC501	Tektronix TVC501 Time to Voltage Converter	Home


N/A	DLM50-20-100	Transistor Devices DLM50-20-100 Modular Electronic Load	Home
Transistor Devices DLM50-20-100 Modular Electronic Load with 4 DLM 50-20-100 modules. Three of the modules have digital readouts. Product Info: Operating Voltage: 3 - 50 Volts Load Current: 0 - 20 Amps Power Dissipation: 0 - 100 Watts Response Time: <50ｵS

N/A	DLM 50-20-100	Transistor Devises Inc Mainframe w/ 4 DLM 50-20-100 Meter Range Plug Ins	Home
Transistor Devises Inc Mainframe w/ 4 DLM 50-20-100 Meter Range Plug Ins

Valhalla	929-0022	*Varian Sublimation Controller Factory Sealed* & 10 Mini TI-BALL Replacements (NIB)**	Home
Our Varian Sublimation Controller (P/N:929-0022) comes Factory Sealed with Software. It also comes with 10 (New in Box) Mini TI-Ball Pumps (P/N:916-008). Product information describes the Varian Sublimation controller as a titanium sublimation pumps (TSP) controller. The unit is configured to 120 VAC (input voltage 90 to 130 Vac). The unit can be configured by the user to adapt the controller to the different user needs.(Manual, automatic, automat/remote and remote set)

Wavecom Electronics	4000	Wavecom Electronics 4000 Power Supply Plug in	Home


Xantrex	20-60	Xantrek XFR 20-60 DC Power Supply	Home
This is a used Xantrek XFR 20-60 DC Power Supply. * Output Voltage: 0-20 V * Output Current: 0-60 A * Output Power: 1200 W Line Regulation 2: * Voltage: 4 mV * Current: 8 mA

contact webmaster | powered by corezon

All logos and trademarks are properties of their respective companies. Product price, specification, warranty and availability subject to change without notice.

Go to Our Web Site
		This is our product index page. Please use the keyword searching to narrow down the result. Or try our Advanced Search function.