The Anritsu MP1552B is a portable analyzer designed specifically for troubleshooting the construction and maintenance of SDH, PDH, and ATM networks, as well as for evaluating equipment for these networks. Various systems can be configured using plug-in units, according to the application. The MP1552B has two basic slots and three application slots. CEPT, North American, and Japanese systems can be analyzed by installing interface units into the basic slots. In addition, when two interface units are installed at the same time, the analyzer can perform international mapping. ATM and Jitter/Wander tests can be performed by installing application plug-in units in the three other slots. The analyzer has a built-in printer and 3.5 inch floppy disk drive as standard. The measurement results can be printed out or the data can be saved directly to the FDD for reading with an external personal computer. Furthermore, the FDD can be used to upgrade the analyzer firmware, making compliance with the latest ITU-T specifications easy. The pop-up menus permit item selection at a glance, so even a novice can use the MP1552B immediately. In addition, the auto setup function enables automatic line mapping and easy line evaluation. Cards Included: Anritsu MP0121A - 2/8/34/139/156M Unit Anritsu MP01228 - 1.5/45/52/52M (1.31) Unit Anritsu MP0126A - 2/8/34/139M 156/622M Jitter Unit.
Screen shows scuffs and scratches as seen in photos. Instrument still functions accordingly.
- 01 FDD, RS-232C
- 02 GPIB
- 06 Framed: 2 Mb/s (with/without CRC-4 at channels 30/31, G.704), 8 Mb/s (G.742), 34 Mb/s (G.751), 139 Mb/s (G.751),MUX/DEMUX
- 07 Framed: 1.5 Mb/s (D4, ESF, Japan ESF*3), 45 Mb/s (M13, C-bit), MUX/DEMUX